diff --git a/editor/texlive-bin/actions.py b/editor/texlive-bin/actions.py new file mode 100644 index 0000000000..d97c67e039 --- /dev/null +++ b/editor/texlive-bin/actions.py @@ -0,0 +1,156 @@ +#!/usr/bin/python +# -*- coding: utf-8 -*- +# +# Licensed under the GNU General Public License, version 3. +# See the file http://www.gnu.org/licenses/gpl.txt + +from pisi.actionsapi import autotools +from pisi.actionsapi import pisitools +from pisi.actionsapi import shelltools +from pisi.actionsapi import get +from pisi.actionsapi import libtools +from pisi.actionsapi import texlivemodules + +import os + +WorkDir = "." +buildDir = 'source/build' + +def setup(): + shelltools.makedirs(buildDir) + shelltools.cd(buildDir) + shelltools.sym("../configure", "configure") + autotools.configure("--prefix=/usr \ + --sysconfdir=/etc \ + --datarootdir=/usr/share \ + --datadir=/usr/share \ + --mandir=/usr/share/man \ + --disable-native-texlive-build \ + --bindir=/usr/bin \ + --with-banner-add=/PisiLinux \ + --disable-psutils \ + --disable-t1utils \ + --enable-multiplatform \ + --disable-static \ + --enable-ipc \ + --with-x \ + --disable-xindy \ + --with-system-zlib \ + --with-system-pnglib \ + --with-system-ncurses \ + --with-system-t1lib \ + --with-system-gd \ + --without-system-xpdf \ + --with-system-graphite2 \ + --with-system-freetype2 \ + --disable-luatex") + +def build(): + + shelltools.cd(buildDir) + autotools.make() + +def install(): + shelltools.cd(buildDir) + autotools.rawInstall("prefix=/usr DESTDIR=%s" % get.installDIR()) + + #install biber + pisitools.dobin("../../biber") + + #pisitools.dodir("/usr/share/tlpkg/TeXLive") + #shelltools.move("%s/source/utils/biber/TeXLive/*.pm" % get.workDIR(), "%s/usr/share/tlpkg/TeXLive" % get.installDIR()) + + # remove aleph from fmtutil.cnf + pisitools.dosed("%s/usr/share/texmf-dist/web2c/fmtutil.cnf" % get.installDIR(), "^.*aleph.*$") + + pisitools.insinto("/etc/texmf/texconfig", "%s/usr/share/texmf-dist/texconfig/tcfmgr.map" % get.installDIR(), sym=True) + + # fix symlinks, some are incorrect + # makefile patching is another way, but there ar/dvipdfmx.cfge lot of scripts + # pathing each makefile makes it much harder, for now this is a "simpler" solution + for binary in shelltools.ls(get.installDIR() + "/usr/bin"): + real_path = shelltools.realPath(get.installDIR() + "/usr/bin/" + binary) + if "texmf" in real_path and not os.path.exists(real_path): # modify only if it is broken + base_path = real_path.replace(get.installDIR() + "/usr", "") + new_path = "/usr/share" + base_path + shelltools.unlink(get.installDIR() + "/usr/bin/" + binary) + pisitools.dosym(new_path, "/usr/bin/" + binary) + + + bibtexextra_scripts=["bibexport", "listbib" ,"multibibliography", "urlbst"] + + core_scripts=["a2ping","a5toa4", "adhocfilelist", "afm2afm", "allcm", "allec", "allneeded", "arara","arlatex" + ,"autoinst", "bundledoc", "checkcites", "chkweb", "context", "ctanify", "ctanupload", "ctxtools", "de-macro", "deweb" + ,"dosepsbin", "dtxgen", "dvi2fax", "dviasm", "dvired", "e2pall", "epstopdf", "findhyph", "fmtutil", "fmtutil-sys" + ,"fontinst", "fragmaster", "installfont-tl", "kpsepath", "kpsetool", "kpsewhere", "kpsexpand", "latex2man", "latexdiff" + ,"latexdiff-vc", "latexfileversion", "latexmk", "latexpand", "latexrevise", "listings-ext.sh", "ltxfileinfo", "lua2dox_filter" + ,"luaotfload-tool", "luatools", "match_parens", "mf2pt1", "mkjobtexmf", "mkluatexfontdb", "mkt1font", "mktexfmt", "mptopdf" + ,"mtxrun", "ot2kpx", "pdf180", "pdf270", "pdf90", "pdfatfi", "pdfbook", "pdfcrop", "pdfflip", "pdfjam", "pdfjam-pocketmod" + ,"pdfjam-slides3up", "pdfjam-slides6up", "pdfjoin", "pdfnup", "pdfpun", "pfarrei", "pkfix", "pkfix-helper", "ps2eps", "ps2frag" + ,"pslatex", "pstopdf", "purifyeps", "repstopdf", "rpdfcrop", "rungs", "simpdftex", "sty2dtx", "texconfig", "texconfig-dialog" + ,"texconfig-sys", "texcount", "texdef", "texdiff", "texdirflatten", "texdoc", "texdoctk", "texexec", "texindy", "texlinks" + ,"texliveonfly", "texloganalyser", "texmfstart", "thumbpdf", "typeoutfileinfo", "updmap", "updmap-sys", "vpl2ovp", "vpl2vpl", "xindy"] + + htmlxml_scripts=["ht", "htcontext", "htlatex", "htmex", "httex", "httexi", "htxelatex", "htxetex", "mk4ht"] + + langcyrillic_scripts=["rubibtex", "rumakeindex"] + + langcjk_scripts=["convbkmk", "ptex2pdf", "kanji-fontmap-creator", "kanji-config-updmap", "kanji-config-updmap-sys"] + + langextra_scripts=["ebong"] + + langgreek_scripts=["mkgrkindex"] + + latexextra_scripts=["authorindex", "exceltex", "makeglossaries", "pdfannotextractor", "perltex", "ps4pdf", "splitindex" ,"svn-multi", "vpe"] + + music_scripts=["m-tx", "musixtex", "musixflx", "pmx2pdf"] + + pictures_scripts=["cachepic", "epspdf", "epspdftk", "fig4latex", "mathspic"] + + pstricks_scripts=["pedigree", "pst2pdf"] + + science_scripts=["ulqda"] + + # remove unneeded files and symlinks + dirs = [] + for g in [bibtexextra_scripts, core_scripts, htmlxml_scripts, \ + langcjk_scripts, langcyrillic_scripts, langextra_scripts, \ + langgreek_scripts, latexextra_scripts, music_scripts, \ + pictures_scripts, pstricks_scripts, science_scripts, \ + ["tlmgr"]]: + for s in g: + if shelltools.isLink("%s/usr/bin/%s" % (get.installDIR(), s)): + realpath = shelltools.realPath("%s/usr/bin/%s" % (get.installDIR(), s)) + dirname = shelltools.dirName(realpath) + if not dirname in dirs: dirs.append(dirname) + if not dirname == "%s/usr/bin" % get.installDIR(): + if shelltools.isFile(realpath): shelltools.unlink(realpath) + pisitools.remove("/usr/bin/%s" % s) + + # remove empty dirs + while dirs: + tmpdirs = dirs[:] + for d in tmpdirs: + if not shelltools.ls(d): + shelltools.unlinkDir(d) + dirname = shelltools.dirName(d) + if not dirname in dirs: dirs.append(dirname) + dirs.remove(d) + + pdftexsymlinks=["amstex", "cslatex", "csplain", "eplain", "etex", "jadetex", "latex", "mex", "mllatex", "mltex" + ,"pdfetex", "pdfcslatex", "pdfcsplain", "pdfjadetex", "pdflatex", "pdfmex", "pdfxmltex", "texsis", "utf8mex", "xmltex"] + + for symlink in pdftexsymlinks: + pisitools.dosym("pdftex", "/usr/bin/%s" % symlink) + + luatexsymlinks=["dvilualatex", "dviluatex", "lualatex"] + + for symlink in luatexsymlinks: + pisitools.dosym("pdftex", "/usr/bin/%s" % symlink) + + + pisitools.dosym("eptex", "/usr/bin/platex") + pisitools.dosym("euptex", "/usr/bin/uplatex") + pisitools.dosym("xetex", "/usr/bin/xelatex") + + pisitools.removeDir("/usr/share/texmf-dist") \ No newline at end of file diff --git a/editor/texlive-bin/files/09-texlive-fonts.conf b/editor/texlive-bin/files/09-texlive-fonts.conf new file mode 100644 index 0000000000..e0b23738a5 --- /dev/null +++ b/editor/texlive-bin/files/09-texlive-fonts.conf @@ -0,0 +1,8 @@ + + + + /usr/share/texmf-dist/fonts/opentype + /usr/share/texmf-dist/fonts/truetype + /usr/local/share/texmf/fonts/opentype + /usr/local/share/texmf/fonts/truetype + \ No newline at end of file diff --git a/editor/texlive-bin/files/arch/fix-fontforge-encoding.patch b/editor/texlive-bin/files/arch/fix-fontforge-encoding.patch new file mode 100644 index 0000000000..7a77886b3f --- /dev/null +++ b/editor/texlive-bin/files/arch/fix-fontforge-encoding.patch @@ -0,0 +1,12 @@ +--- source/texk/web2c/luatexdir/luafontloader/fontforge/fontforge/noprefs.c.orig 2009-09-30 19:27:00.935039526 +0200 ++++ source/texk/web2c/luatexdir/luafontloader/fontforge/fontforge/noprefs.c 2009-09-30 19:28:04.908364646 +0200 +@@ -495,6 +495,9 @@ + { "Big5HKSCS", e_big5hkscs }, + { "Big5-HKSCS", e_big5hkscs }, + { "UTF-8", e_utf8 }, ++ { "utf-8", e_utf8 }, ++ { "UTF8", e_utf8 }, ++ { "utf8", e_utf8 }, + { "ISO-10646/UTF-8", e_utf8 }, + { "ISO_10646/UTF-8", e_utf8 }, + { "UCS2", e_unicode }, diff --git a/editor/texlive-bin/files/arch/poppler-0.26.patch b/editor/texlive-bin/files/arch/poppler-0.26.patch new file mode 100644 index 0000000000..a97b15529a --- /dev/null +++ b/editor/texlive-bin/files/arch/poppler-0.26.patch @@ -0,0 +1,104 @@ +--- trunk/source/texk/web2c/luatexdir/image/epdf.h 2013/01/20 19:58:26 4559 ++++ trunk/source/texk/web2c/luatexdir/image/epdf.h 2014/01/02 15:35:31 4718 +@@ -40,21 +40,22 @@ + # include + # include + # include +-# include "Object.h" +-# include "Stream.h" +-# include "Gfx.h" +-# include "Annot.h" +-# include "Array.h" +-# include "Dict.h" +-# include "XRef.h" +-# include "Catalog.h" +-# include "Link.h" +-# include "Page.h" +-# include "GfxFont.h" +-# include "PDFDoc.h" +-# include "GlobalParams.h" +-# include "Error.h" +-# include "FileSpec.h" ++# include ++# include ++# include ++# include ++# include ++# include ++# include ++# include ++# include ++# include ++# include ++# include ++# include ++# include ++# include ++# include + + extern "C" { + +@@ -81,8 +82,8 @@ + # include "utils/avlstuff.h" + # include "pdf/pdftypes.h" + +-# include "lua52/lua.h" +-# include "lua52/lauxlib.h" ++# include "lua.h" ++# include "lauxlib.h" + + /* pdfgen.w */ + extern int ten_pow[10]; +--- trunk/source/texk/web2c/luatexdir/lua/lepdflib.cc 2013/04/05 10:54:08 4629 ++++ trunk/source/texk/web2c/luatexdir/lua/lepdflib.cc 2014/01/02 15:35:31 4718 +@@ -65,6 +65,7 @@ + #define M_PDFRectangle "PDFRectangle" + #define M_Ref "Ref" + #define M_Stream "Stream" ++#define M_StructTreeRoot "StructTreeRoot" + #define M_XRefEntry "XRefEntry" + #define M_XRef "XRef" + +@@ -96,6 +97,7 @@ + new_poppler_userdata(PDFRectangle); + new_poppler_userdata(Ref); + new_poppler_userdata(Stream); ++new_poppler_userdata(StructTreeRoot); + new_poppler_userdata(XRef); + + //********************************************************************** +@@ -573,7 +575,11 @@ + + m_poppler_get_GOOSTRING(Catalog, getBaseURI); + m_poppler_get_GOOSTRING(Catalog, readMetadata); ++#ifdef GETSTRUCTTREEROOT_RETURNS_OBJECT + m_poppler_get_poppler(Catalog, Object, getStructTreeRoot); ++#else ++m_poppler_get_poppler(Catalog, StructTreeRoot, getStructTreeRoot); ++#endif + + static int m_Catalog_findPage(lua_State * L) + { +@@ -2146,14 +2152,22 @@ + + static int m_PDFDoc_getStructTreeRoot(lua_State * L) + { ++#ifdef GETSTRUCTTREEROOT_RETURNS_OBJECT + Object *obj; ++#else ++ StructTreeRoot *obj; ++#endif + udstruct *uin, *uout; + uin = (udstruct *) luaL_checkudata(L, 1, M_PDFDoc); + if (uin->pd != NULL && uin->pd->pc != uin->pc) + pdfdoc_changed_error(L); + if (((PdfDocument *) uin->d)->doc->getCatalog()->isOk()) { + obj = ((PdfDocument *) uin->d)->doc->getStructTreeRoot(); ++#ifdef GETSTRUCTTREEROOT_RETURNS_OBJECT + uout = new_Object_userdata(L); ++#else ++ uout = new_StructTreeRoot_userdata(L); ++#endif + uout->d = obj; + uout->pc = uin->pc; + uout->pd = uin->pd; diff --git a/editor/texlive-bin/files/fix-fontforge-encoding.patch b/editor/texlive-bin/files/fix-fontforge-encoding.patch new file mode 100644 index 0000000000..8104b32899 --- /dev/null +++ b/editor/texlive-bin/files/fix-fontforge-encoding.patch @@ -0,0 +1,12 @@ +--- source/texk/web2c/luatexdir/luafontloader/fontforge/fontforge/noprefs.c.orig 2009-09-30 19:27:00.935039526 +0200 ++++ source/texk/web2c/luatexdir/luafontloader/fontforge/fontforge/noprefs.c 2009-09-30 19:28:04.908364646 +0200 +@@ -495,6 +495,9 @@ + { "Big5HKSCS", e_big5hkscs }, + { "Big5-HKSCS", e_big5hkscs }, + { "UTF-8", e_utf8 }, ++ { "utf-8", e_utf8 }, ++ { "UTF8", e_utf8 }, ++ { "utf8", e_utf8 }, + { "ISO-10646/UTF-8", e_utf8 }, + { "ISO_10646/UTF-8", e_utf8 }, + { "UCS2", e_unicode }, diff --git a/editor/texlive-bin/files/luatex-r4449-radical-rule-thickness.patch b/editor/texlive-bin/files/luatex-r4449-radical-rule-thickness.patch new file mode 100644 index 0000000000..26cc9877a2 --- /dev/null +++ b/editor/texlive-bin/files/luatex-r4449-radical-rule-thickness.patch @@ -0,0 +1,23 @@ +Index: source/texk/web2c/luatexdir/tex/mlist.w +=================================================================== +--- source/texk/web2c/luatexdir/tex/mlist.w (revision 4448) ++++ source/texk/web2c/luatexdir/tex/mlist.w (revision 4449) +@@ -1798,7 +1798,17 @@ + theta = fraction_rule(cur_style); + y = var_delimiter(left_delimiter(q), cur_size, + height(x) + depth(x) + clr + theta, NULL, cur_style); +- theta = height(y); ++ /* If |y| is a composite then set |theta| to the height of its top ++ character, else set it to the height of |y|. */ ++ if (list_ptr(y) != null ++ && type(list_ptr(y)) == hlist_node ++ && list_ptr(list_ptr(y)) != null ++ && type(list_ptr(list_ptr(y))) == glyph_node) { /* and it should be */ ++ theta = char_height(font(list_ptr(list_ptr(y))), ++ character(list_ptr(list_ptr(y)))); ++ } else { ++ theta = height(y); ++ } + } else { + y = var_delimiter(left_delimiter(q), cur_size, + height(x) + depth(x) + clr + theta, NULL, cur_style); \ No newline at end of file diff --git a/editor/texlive-bin/files/poppler-0.20.patch b/editor/texlive-bin/files/poppler-0.20.patch new file mode 100644 index 0000000000..eb6db07f44 --- /dev/null +++ b/editor/texlive-bin/files/poppler-0.20.patch @@ -0,0 +1,22 @@ +--- source/texk/web2c/luatexdir/lua/lepdflib.cc.orig 2011-10-06 06:14:20.000000000 +0000 ++++ source/texk/web2c/luatexdir/lua/lepdflib.cc 2012-05-17 11:30:26.327236883 +0000 +@@ -1433,7 +1433,7 @@ + + static int m_Object_getTypeName(lua_State * L) + { +- char *s; ++ const char *s; + udstruct *uin; + uin = (udstruct *) luaL_checkudata(L, 1, M_Object); + if (uin->pd != NULL && uin->pd->pc != uin->pc) +--- source/texk/web2c/pdftexdir/pdftosrc.cc.orig 2012-06-24 17:12:34.376329435 +0200 ++++ source/texk/web2c/pdftexdir/pdftosrc.cc 2012-06-24 17:12:25.490003152 +0200 +@@ -134,7 +134,7 @@ + exit(1); + } + if (extract_xref_table) { +- int size = xref->getSize(); ++ int size = xref->getNumObjects(); + int i; + for (i = 0; i < size; i++) { + if (xref->getEntry(i)->offset == 0xffffffff) \ No newline at end of file diff --git a/editor/texlive-bin/files/texmf.cnf b/editor/texlive-bin/files/texmf.cnf new file mode 100644 index 0000000000..d23ebdbc79 --- /dev/null +++ b/editor/texlive-bin/files/texmf.cnf @@ -0,0 +1,724 @@ +% texmf.cnf for TeXLive/Arch Linux -- runtime path configuration file for kpathsea. +% Public domain. +% +% If you modify this original file, YOUR CHANGES WILL BE LOST when it is +% updated. Instead, put your changes -- and only your changes, not an +% entire copy of the full texmf.cnf! -- in ../../texmf.cnf. That is, if +% this file is installed in /some/path/to/texlive/2011/texmf/web2c/texmf.cnf, +% add your custom settings to /some/path/to/texlive/2011/texmf.cnf. +% +% What follows is a super-summary of what this .cnf file can +% contain. Please read the Kpathsea manual for more information. +% +% Any identifier (sticking to A-Za-z_ for names is safest) can be assigned. +% The `=' (and surrounding spaces) is optional. +% $foo (or ${foo}) in a value expands to the envvar or cnf value of foo. +% Long lines can be continued with a \. +% +% Earlier entries (in the same or another file) override later ones, and +% an environment variable foo overrides any texmf.cnf definition of foo. +% +% All definitions are read before anything is expanded, so you can use +% variables before they are defined. +% +% If a variable assignment is qualified with `.PROGRAM', it is ignored +% unless the current executable (last filename component of argv[0]) is +% named PROGRAM. This foo.PROGRAM construct is not recognized on the +% right-hand side. For environment variables, use FOO_PROGRAM. +% +% Which file formats use which paths for searches is described in the +% various programs' and the Kpathsea documentation (http://tug.org/kpathsea). +% +% // means to search subdirectories (recursively). +% A leading !! means to look only in the ls-R db, never on the disk. +% In this file, either ; or : can be used to separate path components. +% A leading/trailing/doubled path separator in the paths will be +% expanded into the compile-time default. Probably not what you want. +% +% Brace notation is supported, for example: /usr/local/{mytex,othertex} +% expands to /usr/local/mytex:/usr/local/othertex. We make extensive +% use of this. + + +% Part 1: Search paths and directories. + +% This is the parent directory of our several trees, i.e., +% /usr/local/texlive/YYYY in the original TeX Live distribution. +% +% All trees must be organized according to the TeX Directory Structure +% (http://tug.org/tds), or files may not be found. +% +% Redistributors will probably want $SELFAUTODIR/share, i.e., /usr/share. +TEXMFROOT = $SELFAUTODIR/share + +% The tree containing runtime files related to the specific +% distribution and version. +TEXMFMAIN = $TEXMFROOT/texmf + +% The main tree of packages, distribution-agnostic: +TEXMFDIST = $TEXMFROOT/texmf-dist + +% Local additions to the distribution trees. +TEXMFLOCAL = /usr/local/share/texmf + +% TEXMFSYSVAR, where *-sys store cached runtime data. +TEXMFSYSVAR = /var/lib/texmf + +% TEXMFSYSCONFIG, where *-sys store configuration data. +TEXMFSYSCONFIG = /etc/texmf + +% Per-user texmf tree(s) -- organized per the TDS, as usual. To define +% more than one per-user tree, set this to a list of directories in +% braces, as described above. (This used to be HOMETEXMF.) ~ expands +% to %USERPROFILE% on Windows, $HOME otherwise. +TEXMFHOME = ~/texmf + +% TEXMFVAR, where texconfig/updmap/fmtutil store cached runtime data. +TEXMFVAR = ~/.texlive/texmf-var + +% TEXMFCONFIG, where texconfig/updmap/fmtutil store configuration data. +TEXMFCONFIG = ~/.texlive/texmf-config + +% List all the texmf trees. +% +% For texconfig to work properly, TEXMFCONFIG and TEXMFVAR should be named +% explicitly and before all other trees. +% +% TEXMFLOCAL follows TEXMFMAIN (and precedes TEXMFDIST) because the +% files in TEXMFMAIN are tightly coupled with the particular version of +% the distribution, such as configuration files. Overriding them would +% be more likely to cause trouble than help. On the other hand, the +% bulk of packages and fonts are in TEXMFDIST, and locally-installed +% versions should take precedence over those -- although it is generally +% a source of confusion to have different versions of a package +% installed, whatever the trees, so try to avoid it. +TEXMF = {$TEXMFCONFIG,$TEXMFVAR,$TEXMFHOME,!!$TEXMFSYSCONFIG,!!$TEXMFSYSVAR,!!$TEXMFMAIN,!!$TEXMFLOCAL,!!$TEXMFDIST} + +% Where to look for ls-R files. There need not be an ls-R in the +% directories in this path, but if there is one, Kpathsea will use it. +% By default, this is only the !! elements of TEXMF, so that mktexlsr +% does not create ls-R files in the non-!! elements -- because if an +% ls-R is present, it will be used, and the disk will not be searched. +% This is arguably a bug in kpathsea. +TEXMFDBS = {!!$TEXMFSYSCONFIG,!!$TEXMFSYSVAR,!!$TEXMFMAIN,!!$TEXMFLOCAL,!!$TEXMFDIST} + +% The system trees. These are the trees that are shared by all users. +% If a tree appears in this list, the mktex* scripts will use +% VARTEXFONTS for generated files, if the original tree isn't writable; +% otherwise the current working directory is used. +SYSTEXMF = $TEXMFSYSVAR;$TEXMFMAIN;$TEXMFLOCAL;$TEXMFDIST + +% Where generated fonts may be written. This tree is used when the sources +% were found in a system tree and either that tree wasn't writable, or the +% varfonts feature was enabled in MT_FEATURES in mktex.cnf. +VARTEXFONTS = $TEXMFVAR/fonts + +% On some systems, there will be a system tree which contains all the font +% files that may be created as well as the formats. For example +% TEXMFVAR = /var/lib/texmf +% is used in many distros. In this case, set VARTEXFONTS like this +%VARTEXFONTS = $TEXMFVAR/fonts +% and do not mention it in TEXMFDBS (but _do_ mention TEXMFVAR). +% +% Remove $VARTEXFONTS from TEXMFDBS if the VARTEXFONTS directory is below +% one of the TEXMF directories (avoids overlapping ls-R files). + + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% Usually you will not need to edit any of the following variables. +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +% WEB2C is for Web2C specific files. The current directory may not be +% a good place to look for them. +WEB2C = $TEXMF/web2c + +% TEXINPUTS is for TeX input files -- i.e., anything to be found by \input +% or \openin, including .sty, .eps, etc. We specify paths for all known +% formats, past or present. Not all of them are built these days. + +% Plain TeX. Have the command tex check all directories as a last +% resort, we may have plain-compatible stuff anywhere. +TEXINPUTS.tex = .;$TEXMF/tex/{plain,generic,}// + +% Fontinst needs to read afm files. +TEXINPUTS.fontinst = .;$TEXMF/{tex,fonts/afm}// + +% Other plain-based formats. +TEXINPUTS.amstex = .;$TEXMF/tex/{amstex,plain,generic,}// +TEXINPUTS.csplain = .;$TEXMF/tex/{csplain,plain,generic,}// +TEXINPUTS.eplain = .;$TEXMF/tex/{eplain,plain,generic,}// +TEXINPUTS.ftex = .;$TEXMF/tex/{formate,plain,generic,}// +TEXINPUTS.mex = .;$TEXMF/tex/{mex,plain,generic,}// +TEXINPUTS.texinfo = .;$TEXMF/tex/{texinfo,plain,generic,}// + +% LaTeX 2e specific macros are stored in latex/, macros that can only be +% used with 2.09 in latex209/. In addition, we look in the directory +% latex209, useful for macros that were written for 2.09 and do not +% mention 2e at all, but can be used with 2e. +TEXINPUTS.cslatex = .;$TEXMF/tex/{cslatex,csplain,latex,generic,}// +TEXINPUTS.latex = .;$TEXMF/tex/{latex,generic,}// +TEXINPUTS.latex209 = .;$TEXMF/tex/{latex209,generic,latex,}// +TEXINPUTS.olatex = .;$TEXMF/tex/{latex,generic,}// + +% MLTeX. +TEXINPUTS.frlatex = .;$TEXMF/tex/{french,latex,generic,}// +TEXINPUTS.frtex = .;$TEXMF/tex/{french,plain,generic,}// +TEXINPUTS.mllatex = .;$TEXMF/tex/{latex,generic,}// +TEXINPUTS.mltex = .;$TEXMF/tex/{plain,generic,}// + +% e-TeX. +TEXINPUTS.elatex = .;$TEXMF/tex/{latex,generic,}// +TEXINPUTS.etex = .;$TEXMF/tex/{plain,generic,}// + +% pdfTeX. +TEXINPUTS.pdfcslatex = .;$TEXMF/tex/{cslatex,csplain,latex,generic,}// +TEXINPUTS.pdfcsplain = .;$TEXMF/tex/{csplain,plain,generic,}// +TEXINPUTS.pdflatex = .;$TEXMF/tex/{latex,generic,}// +TEXINPUTS.pdfmex = .;$TEXMF/tex/{mex,plain,generic,}// +TEXINPUTS.utf8mex = .;$TEXMF/tex/{mex,plain,generic,}// +TEXINPUTS.pdftex = .;$TEXMF/tex/{plain,generic,}// +TEXINPUTS.pdftexinfo = .;$TEXMF/tex/{texinfo,plain,generic,}// +TEXINPUTS.pdfamstex = .;$TEXMF/tex/{amstex,plain,generic,}// + +% pdfeTeX. +TEXINPUTS.pdfelatex = .;$TEXMF/tex/{latex,generic,}// +TEXINPUTS.pdfetex = .;$TEXMF/tex/{plain,generic,}// + +% pdfxTeX. +TEXINPUTS.pdfxlatex = .;$TEXMF/tex/{latex,generic,}// +TEXINPUTS.pdfxmex = .;$TEXMF/tex/{mex,plain,generic,}// +TEXINPUTS.pdfxtex = .;$TEXMF/tex/{plain,generic,}// + +% LuaTeX. +TEXINPUTS.lualatex = .;$TEXMF/tex/{lualatex,latex,luatex,generic,}// +TEXINPUTS.luatex = .;$TEXMF/tex/{luatex,plain,generic,}// +TEXINPUTS.dvilualatex = .;$TEXMF/tex/{lualatex,latex,luatex,generic,}// +TEXINPUTS.dviluatex = .;$TEXMF/tex/{luatex,plain,generic,}// + +% XeTeX. +TEXINPUTS.xelatex = .;$TEXMF/tex/{xelatex,latex,xetex,generic,}// +TEXINPUTS.xeplain = .;$TEXMF/tex/{xeplain,eplain,plain,xetex,generic,}// +TEXINPUTS.xetex = .;$TEXMF/tex/{xetex,plain,generic,}// + +% Omega / Aleph. +TEXINPUTS.aleph = .;$TEXMF/tex/{plain,generic,}// +TEXINPUTS.elambda = .;$TEXMF/tex/{lambda,latex,generic,}// +TEXINPUTS.eomega = .;$TEXMF/tex/{plain,generic,}// +TEXINPUTS.lambda = .;$TEXMF/tex/{lambda,latex,generic,}// +TEXINPUTS.lamed = .;$TEXMF/tex/{lamed,lambda,latex,generic,}// +TEXINPUTS.omega = .;$TEXMF/tex/{plain,generic,}// + +% p(La)TeX. +TEXINPUTS.ptex = .;$TEXMF/tex/{ptex,ptexgeneric,plain,generic,}// +TEXINPUTS.platex = .;$TEXMF/tex/{platex,ptexgeneric,latex,generic,}// + +% epTeX. +TEXINPUTS.eptex = .;$TEXMF/tex/{ptex,ptexgeneric,plain,generic,}// + +% pBibTeX bibliographies and style files. +BIBINPUTS.pbibtex = .;$TEXMF/{pbibtex,bibtex}/bib// +BSTINPUTS.pbibtex = .;$TEXMF/{pbibtex,bibtex}/bst// + +% ConTeXt. +TEXINPUTS.context = .;$TEXMF/tex/{context,plain,generic,}// + +% jadetex. +TEXINPUTS.jadetex = .;$TEXMF/tex/{jadetex,latex,generic,}// +TEXINPUTS.pdfjadetex = .;$TEXMF/tex/{jadetex,latex,generic,}// + +% XMLTeX. +TEXINPUTS.xmltex = .;$TEXMF/tex/{xmltex,latex,generic,}// +TEXINPUTS.pdfxmltex = .;$TEXMF/tex/{xmltex,latex,generic,}// + +% Miscellany, no longer built. +TEXINPUTS.lamstex = .;$TEXMF/tex/{lamstex,plain,generic,}// +TEXINPUTS.lollipop = .;$TEXMF/tex/{lollipop,plain,generic,}// +TEXINPUTS.frpdflatex = .;$TEXMF/tex/{french,latex,generic,}// +TEXINPUTS.frpdftex = .;$TEXMF/tex/{french,plain,generic,}// + +% Earlier entries override later ones, so put this generic one last. +TEXINPUTS = .;$TEXMF/tex/{$progname,generic,}// + +% ttf2tfm. +TTF2TFMINPUTS = .;$TEXMF/ttf2pk// + +% Metafont, MetaPost inputs. +MFINPUTS = .;$TEXMF/metafont//;{$TEXMF/fonts,$VARTEXFONTS}/source// +MPINPUTS = .;$TEXMF/metapost// + +% Dump files (fmt/base/mem) for vir{tex,mf,mp} to read. +% We want to find the engine-specific file, e.g., cont-en.fmt can +% exist under both pdftex/ and xetex/. But just in case some formats +% end up without an engine directory, look directly in web2c/ too. +% We repeat the same definition three times because of the way fmtutil +% is implemented; if we use ${TEXFORMATS}, the mpost/mf/etc. formats +% will not be found. +TEXFORMATS = .;$TEXMF/web2c{/$engine,} +MFBASES = .;$TEXMF/web2c{/$engine,} +MPMEMS = .;$TEXMF/web2c{/$engine,} +% +% As of 2008, pool files don't exist any more (the strings are compiled +% into the binaries), but just in case something expects to find these: +TEXPOOL = .;$TEXMF/web2c +MFPOOL = ${TEXPOOL} +MPPOOL = ${TEXPOOL} + +% support the original xdvi. Must come before the generic settings. +PKFONTS.XDvi = .;$TEXMF/%s;$VARTEXFONTS/pk/{%m,modeless}// +VFFONTS.XDvi = .;$TEXMF/%s +PSHEADERS.XDvi = .;$TEXMF/%q{dvips,fonts/type1}// +TEXPICTS.XDvi = .;$TEXMF/%q{dvips,tex}// + +% Device-independent font metric files. +VFFONTS = .;$TEXMF/fonts/vf// +TFMFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/tfm// + +% The $MAKETEX_MODE below means the drivers will not use a cx font when +% the mode is ricoh. If no mode is explicitly specified, kpse_prog_init +% sets MAKETEX_MODE to /, so all subdirectories are searched. See the manual. +% The modeless part guarantees that bitmaps for PostScript fonts are found. +PKFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/pk/{$MAKETEX_MODE,modeless}// + +% Similarly for the GF format, which only remains in existence because +% Metafont outputs it (and MF isn't going to change). +GFFONTS = .;$TEXMF/fonts/gf/$MAKETEX_MODE// + +% A backup for PKFONTS and GFFONTS. Not used for anything. +GLYPHFONTS = .;$TEXMF/fonts + +% A place to puth everything that doesn't fit the other font categories. +MISCFONTS = .;$TEXMF/fonts/misc// + +% font name map files. This isn't just fonts/map// because ConTeXt +% wants support for having files with the same name in the different +% subdirs. Maybe if the programs ever get unified to accepting the same +% map file syntax the definition can be simplified again. +TEXFONTMAPS = .;$TEXMF/fonts/map/{$progname,pdftex,dvips,}// + +% BibTeX bibliographies and style files. bibtex8 also uses these. +BIBINPUTS = .;$TEXMF/bibtex/bib// +BSTINPUTS = .;$TEXMF/bibtex/{bst,csf}// + +% MlBibTeX. +MLBIBINPUTS = .;$TEXMF/bibtex/bib/{mlbib,}// +MLBSTINPUTS = .;$TEXMF/bibtex/{mlbst,bst}// + +% .ris and .bltxml bibliography formats. +RISINPUTS = .;$TEXMF/bibtex/ris// +BLTXMLINPUTS = .;$TEXMF/bibtex/bltxml// + +% MFT style files. +MFTINPUTS = .;$TEXMF/mft// + +% PostScript headers and prologues (.pro); unfortunately, some programs +% also use this for acessing font files (enc, type1, truetype) +TEXPSHEADERS = .;$TEXMF/{dvips,fonts/{enc,type1,type42,type3}}// +TEXPSHEADERS.gsftopk = .;$TEXMF/{dvips,fonts/{enc,type1,type42,type3,truetype}}// + +% OSFONTDIR is to provide a convenient hook for allowing TeX to find +% fonts installed on the system (outside of TeX). An empty default +% value would add "//" to the search paths, so we give it a dummy value. +% OSFONTDIR = /usr/share/fonts + +% PostScript Type 1 outline fonts. +T1FONTS = .;$TEXMF/fonts/type1//;$OSFONTDIR// + +% PostScript AFM metric files. +AFMFONTS = .;$TEXMF/fonts/afm//;$OSFONTDIR// + +% TrueType outline fonts. +TTFONTS = .;$TEXMF/fonts/{truetype,opentype}//;$OSFONTDIR// + +% OpenType outline fonts. +OPENTYPEFONTS = .;$TEXMF/fonts/{opentype,truetype}//;$OSFONTDIR// + +% Type 42 outline fonts. +T42FONTS = .;$TEXMF/fonts/type42// + +% Ligature definition files. +LIGFONTS = .;$TEXMF/fonts/lig// + +% Dvips' config.* files (this name should not start with `TEX'!). +TEXCONFIG = $TEXMF/dvips// + +% Makeindex style (.ist) files. +INDEXSTYLE = .;$TEXMF/makeindex// + +% Font encoding files (.enc). +ENCFONTS = .;$TEXMF/fonts/enc// + +% CMap files. +CMAPFONTS = .;$TEXMF/fonts/cmap// + +% Subfont definition files. +SFDFONTS = .;$TEXMF/fonts/sfd// + +% OpenType feature files (.fea). +FONTFEATURES=.;$TEXMF/fonts/fea// + +% .cid and .cidmap +FONTCIDMAPS=.;$TEXMF/fonts/cid// + +% pdftex config files: +PDFTEXCONFIG = .;$TEXMF/pdftex/{$progname,}// + +% Used by DMP (ditroff-to-mpx), called by makempx -troff. +TRFONTS = /usr{/local,}/share/groff/{current/font,site-font}/devps +MPSUPPORT = .;$TEXMF/metapost/support + +% For xdvi to find mime.types and .mailcap, if they do not exist in +% ~. These are single directories, not paths. +% (But the default mime.types, at least, may well suffice.) +MIMELIBDIR = /etc +MAILCAPLIBDIR = /etc + +% Default settings for the fontconfig library as used by the Windows +% versions of xetex/xdvipdfmx. On Unixish systems, fontconfig ignores +% this. ConTeXT MkIV (all platforms) also use these values. +% +FONTCONFIG_FILE = fonts.conf +FONTCONFIG_PATH = $TEXMFSYSVAR/fonts/conf +FC_CACHEDIR = $TEXMFSYSVAR/fonts/cache + +% TeX documentation and source files, for use with texdoc and kpsewhich. +TEXDOCS = $TEXMF/doc// +TEXSOURCES = .;$TEXMF/source// + +% Web and CWeb input paths. +WEBINPUTS = .;$TEXMF/web// +CWEBINPUTS = .;$TEXMF/cweb// + +% Omega-related fonts and other files. +OFMFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/{ofm,tfm}// +OPLFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/opl// +OVFFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/{ovf,vf}// +OVPFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/ovp// +OTPINPUTS = .;$TEXMF/omega/otp// +OCPINPUTS = .;$TEXMF/omega/ocp// + +% Some additional input variables for several programs. If you add +% a program that uses the `other text files' or `other binary files' +% search formats, you'll want to add their variables here as well. +T4HTINPUTS = .;$TEXMF/tex4ht// + +%% t4ht utility, sharing files with TeX4ht +TEX4HTFONTSET=alias,iso8859,unicode +TEX4HTINPUTS = .;$TEXMF/tex4ht/base//;$TEXMF/tex4ht/ht-fonts/{$TEX4HTFONTSET}// + +% TeXworks editor configuration and settings +TW_LIBPATH = $TEXMFCONFIG/texworks +TW_INIPATH = $TW_LIBPATH + +% For security, do not look in . for dvipdfmx.cfg, since the D option +% would allow command execution. +DVIPDFMXINPUTS = $TEXMF/dvipdfmx + +% Lua needs to look in TEXINPUTS for lua scripts distributed with packages. +% +% But we can't simply use $TEXINPUTS, since then if TEXINPUTS is set in +% the environment with a colon, say, TEXINPUTS=/some/dir:, the intended +% default expansion of TEXINPUTS will not happen and .lua files under +% the /tex/ will not be found. +% +% So, duplicate the TEXINPUTS.*lualatex values as LUAINPUTS.*lualatex. +% The default LUAINPUTS sufficess for luatex and dviluatex. +% +LUAINPUTS.lualatex = .;$TEXMF/scripts/{$progname,$engine,}/{lua,}//;$TEXMF/tex/{lualatex,latex,luatex,generic,}// +LUAINPUTS.dvilualatex = .;$TEXMF/scripts/{$progname,$engine,}/{lua,}//;$TEXMF/tex/{lualatex,latex,luatex,generic,}// +LUAINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/{lua,}//;$TEXMF/tex/{luatex,plain,generic,}// + +% Lua needs to look for binary lua libraries distributed with packages. +CLUAINPUTS = .;$SELFAUTOLOC/lib/{$progname,$engine,}/lua// + +% Architecture independent executables. +TEXMFSCRIPTS = $TEXMF/scripts/{$progname,$engine,}// + +% Other languages. +JAVAINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/java// +PERLINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/perl// +PYTHONINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/python// +RUBYINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/ruby// + + +%% The mktex* scripts rely on KPSE_DOT. Do not set it in the environment. +% KPSE_DOT = . + +% This definition isn't used from this .cnf file itself (that would be +% paradoxical), but the compile-time default in paths.h is built from it. +% The SELFAUTO* variables are set automatically from the location of +% argv[0], in kpse_set_program_name. +% +% This main texmf.cnf file is installed, for a release YYYY, in a +% directory such as /usr/local/texlive/YYYY/texmf/web2c/texmf.cnf. +% Since this file is subject to future updates, the TeX Live installer +% or human administrator may also create a file +% /usr/local/texlive/YYYY/texmf.cnf; any settings in this latter file +% will take precedence over the distributed one under texmf/web2c. +% +% For security reasons, it is better not to include . in this path. +% +TEXMFCNF = {$SELFAUTOLOC,$SELFAUTODIR,$SELFAUTOPARENT}{,{/share,}/texmf{-local,}/web2c} + +% kpathsea 3.5.3 and later sets these at runtime. To avoid empty +% expansions from binaries linked against an earlier version of the +% library, we set $progname and $engine to something non-empty: +progname = unsetprogname +engine = unsetengine + + +% Part 2: Options. + +% If this option is set to true, `tex a.b' will look first for a.b.tex +% (within each path element), and then for a.b, i.e., we try standard +% extensions first. If this is false, we first look for a.b and then +% a.b.tex, i.e., we try the name as-is first. +% +% Both names are always tried; the difference is the order in which they +% are tried. The setting applies to all searches, not just .tex. +% +% This setting only affects names being looked up which *already* have +% an extension. A name without an extension (e.g., `tex story') will +% always have an extension added first. +% +% The default is true, because we already avoid adding the standard +% extension(s) in the usual cases. E.g., babel.sty will only look for +% babel.sty, not babel.sty.tex, regardless of this setting. +try_std_extension_first = t + +% Enable system commands via \write18{...}. When enabled fully (set to +% t), obviously insecure. When enabled partially (set to p), only the +% commands listed in shell_escape_commands are allowed. Although this +% is not fully secure either, it is much better, and so useful that we +% enable it for everything but bare tex. +shell_escape = p + +% No spaces in this command list. +% +% The programs listed here are as safe as any we know: they either do +% not write any output files, respect openout_any, or have hard-coded +% restrictions similar or higher to openout_any=p. They also have no +% features to invoke arbitrary other programs, and no known exploitable +% bugs. All to the best of our knowledge. They also have practical use +% for being called from TeX. +% +shell_escape_commands = \ +bibtex,bibtex8,\ +kpsewhich,\ +makeindex,\ +repstopdf,\ + +% we'd like to allow: +% dvips - but external commands can be executed, need at least -R1. +% epspdf, ps2pdf, pstopdf - need to respect openout_any, +% and gs -dSAFER must be used and check for shell injection with filenames. +% (img)convert (ImageMagick) - delegates.mgk possible misconfig, besides, +% without Unix convert it hardly seems worth it, and Windows convert +% is something completely different that destroys filesystems, so skip. +% pygmentize - but is the filter feature insecure? +% ps4pdf - but it calls an unrestricted latex. +% rpdfcrop - maybe ok, but let's get experience with repstopdf first. +% texindy,xindy - but is the module feature insecure? +% ulqda - but requires optional SHA1.pm, so why bother. +% tex, latex, etc. - need to forbid --shell-escape, and inherit openout_any. + +% plain TeX should remain unenhanced. +shell_escape.tex = f +shell_escape.initex = f + +% This is used by the Windows script wrapper for restricting searching +% for the purportedly safe shell_escape_commands above to system +% directories. +TEXMF_RESTRICTED_SCRIPTS = \ + {!!$TEXMFMAIN,!!$TEXMFLOCAL,!!$TEXMFDIST}/scripts/{$progname,$engine,}// + +% Allow TeX \openin, \openout, or \input on filenames starting with `.' +% (e.g., .rhosts) or outside the current tree (e.g., /etc/passwd)? +% a (any) : any file can be opened. +% r (restricted) : disallow opening "dotfiles". +% p (paranoid) : as `r' and disallow going to parent directories, and +% restrict absolute paths to be under $TEXMFOUTPUT. +openout_any = p +openin_any = a + +% Write .log/.dvi/etc. files here, if the current directory is unwritable. +%TEXMFOUTPUT = /tmp + +% If a dynamic file creation fails, log the command to this file, in +% either the current directory or TEXMFOUTPUT. Set to the +% empty string or 0 to avoid logging. +MISSFONT_LOG = missfont.log + +% Set to a colon-separated list of words specifying warnings to suppress. +% To suppress everything, use TEX_HUSH = all; this is currently equivalent to +% TEX_HUSH = checksum:lostchar:readable:special +% To suppress nothing, use TEX_HUSH = none or do not set the variable at all. +TEX_HUSH = none + +% Allow TeX, and MF to parse the first line of an input file for +% the %&format construct. +parse_first_line = t + +% But don't parse the first line if invoked as "tex", since we want that +% to remain Knuth-compatible. The src_specials and +% file_line_error_style settings, as well as the options -enctex, +% -mltex, -8bit, etc., also affect this, but they are all off by default. +parse_first_line.tex = f +parse_first_line.initex = f + +% Control file:line:error style messages. +file_line_error_style = f + +% Enable the mktex... scripts by default? These must be set to 0 or 1. +% Particular programs can and do override these settings, for example +% dvips's -M option. Your first chance to specify whether the scripts +% are invoked by default is at configure time. +% +% These values are ignored if the script names are changed; e.g., if you +% set DVIPSMAKEPK to `foo', what counts is the value of the environment +% variable/config value `FOO', not the `MKTEXPK' value. +% +%MKTEXTEX = 0 +%MKTEXPK = 0 +%MKTEXMF = 0 +%MKTEXTFM = 0 +%MKTEXFMT = 0 +%MKOCP = 0 +%MKOFM = 0 + +% Used by makempx to run TeX. We use "etex" because MetaPost is +% expecting DVI, and not "tex" because we want first line parsing. +TEX = etex + +% These variables specify the external program called for the +% interactive `e' option. %d is replaced by the line number and %s by +% the current filename. The default is specified at compile-time, and +% we let that stay in place since different platforms like different values. +%TEXEDIT = vi +%d '%s' % default for Unix +%TEXEDIT = texworks --position=+%d "%s" % default for Windows +%MFEDIT = ${TEXEDIT} +%MPEDIT = ${TEXEDIT} + +% The default `codepage and sort order' file for BibTeX8, when none is +% given as command line option or environment variable. +BIBTEX_CSFILE = 88591lat.csf + +% This variable is specific to Windows. It must be set to 0 or 1. The +% default is 0. Setting it to 1 tells the Windows script wrappers to +% use an already installed Perl interpreter if one is found on the +% search path, in preference to the Perl shipped with TeX Live. Thus, +% it may be useful if you both (a) installed a full Perl distribution +% for general use, and (b) need to run Perl programs from TL that use +% additional modules we don't provide. The TL Perl does provide all the +% standard Perl modules. +% +%TEXLIVE_WINDOWS_TRY_EXTERNAL_PERL = 0 + + +% Part 3: Array and other sizes for TeX (and Metafont). +% +% If you want to change some of these sizes only for a certain TeX +% variant, the usual dot notation works, e.g., +% main_memory.hugetex = 20000000 +% +% If a change here appears to be ignored, try redumping the format file. + +% Memory. Must be less than 8,000,000 total. +% +% main_memory is relevant only to initex, extra_mem_* only to non-ini. +% Thus, have to redump the .fmt file after changing main_memory; to add +% to existing fmt files, increase extra_mem_*. (To get an idea of how +% much, try \tracingstats=2 in your TeX source file; +% web2c/tests/memtest.tex might also be interesting.) +% +% To increase space for boxes (as might be needed by, e.g., PiCTeX), +% increase extra_mem_bot. +% +% For some xy-pic samples, you may need as much as 700000 words of memory. +% For the vast majority of documents, 60000 or less will do. +% +main_memory = 3000000 % words of inimemory available; also applies to inimf&mp +extra_mem_top = 0 % extra high memory for chars, tokens, etc. +extra_mem_bot = 0 % extra low memory for boxes, glue, breakpoints, etc. + +% ConTeXt needs lots of memory. +extra_mem_top.context = 2000000 +extra_mem_bot.context = 4000000 + +% Words of font info for TeX (total size of all TFM files, approximately). +% Must be >= 20000 and <= 147483647 (without tex.ch changes). +font_mem_size = 3000000 + +% Total number of fonts. Must be >= 50 and <= 9000 (without tex.ch changes). +font_max = 9000 + +% Extra space for the hash table of control sequences. +hash_extra = 200000 + +% Max number of characters in all strings, including all error messages, +% help texts, font names, control sequences. These values apply to TeX. +pool_size = 3250000 +% Minimum pool space after TeX's own strings; must be at least +% 25000 less than pool_size, but doesn't need to be nearly that large. +string_vacancies = 90000 +% Maximum number of strings. +max_strings = 500000 +% min pool space left after loading .fmt +pool_free = 47500 + +% Buffer size. TeX uses the buffer to contain input lines, but macro +% expansion works by writing material into the buffer and reparsing the +% line. As a consequence, certain constructs require the buffer to be +% very large, even though most documents can be handled with a small value. +buf_size = 200000 + +% Hyphenation trie. The maximum possible is 4194303 (ssup_trie_size in +% the sources), but we don't need that much. The value here suffices +% for all known free hyphenation patterns to be loaded simultaneously +% (as TeX Live does). +% +trie_size = 1000000 + +hyph_size = 8191 % prime number of hyphenation exceptions, >610, <32767. + % http://primes.utm.edu/curios/page.php/8191.html +nest_size = 500 % simultaneous semantic levels (e.g., groups) +max_in_open = 15 % simultaneous input files and error insertions, + % also applies to MetaPost +param_size = 10000 % simultaneous macro parameters, also applies to MP +save_size = 50000 % for saving values outside current group +stack_size = 5000 % simultaneous input sources + +% These are Omega-specific. +ocp_buf_size = 500000 % character buffers for ocp filters. +ocp_stack_size = 10000 % stacks for ocp computations. +ocp_list_size = 1000 % control for multiple ocps. + +% These work best if they are the same as the I/O buffer size, but it +% doesn't matter much. Must be a multiple of 8. +dvi_buf_size = 16384 % TeX +gf_buf_size = 16384 % MF + +% It's probably inadvisable to change these. At any rate, we must have: +% 45 < error_line < 255; +% 30 < half_error_line < error_line - 15; +% 60 <= max_print_line; +% These apply to TeX, Metafont, and MetaPost. +error_line = 79 +half_error_line = 50 +max_print_line = 79 + +% Metafont only. +screen_width.mf = 1664 +screen_depth.mf = 1200 + +% BibTeX only (max_strings also determines hash_size and hash_prime). +ent_str_size = 250 +glob_str_size = 5000 +max_strings.bibtex = 35307 +max_strings.bibtex8 = 35307 +max_strings.bibtexu = 35307 +max_strings.pbibtex = 35307 + +% GFtype only. +line_length.gftype = 500 +max_rows.gftype = 8191 +max_cols.gftype = 8191 \ No newline at end of file diff --git a/editor/texlive-bin/pspec.xml b/editor/texlive-bin/pspec.xml new file mode 100644 index 0000000000..af29f406d5 --- /dev/null +++ b/editor/texlive-bin/pspec.xml @@ -0,0 +1,98 @@ + + + + + texlive-bin + http://www.tug.org/texlive + + PisiLinux Community + admins@pisilinux.org + + GPLv2 + data:doc + Tex Live binaries + Texlive binaries that are an essential part of TeXLive component. + + http://mirrors.edge.kernel.org/archlinux/other/texlive/texlive-bin-source-2018.47465.tar.xz + https://sourceforge.net/projects/biblatex-biber/files/biblatex-biber/2.13/binaries/Linux/biber-linux_x86_64.tar.gz + + poppler-devel + graphite2 + libpaper-devel + gd-devel + icu4c-devel + libXt-devel + t1lib-devel + ffcall-devel + libXaw-devel + libXmu-devel + libXpm-devel + libsigsegv-devel + clisp-devel + libXi-devel + ghostscript-devel + + + + + + + texlive-bin + + gd + zlib + icu4c + libXt + t1lib + libXi + ffcall + libX11 + libgcc + libpng + libXaw + libXmu + libXpm + freetype + graphite2 + fontconfig + libsigsegv + ghostscript + + + + /usr/bin + /usr/lib + /usr/share/man + /usr/share/info + /usr/share + /usr/share/texmf-dist + /usr/share/tlpkg + /etc + + + + + + + + + texlive-bin-devel + Development files for texlive-bin + + texlive-bin + + + /usr/include + + + + + + 2020-03-21 + 2018.47465 + First release + Osman Erkan + osman.erkan@pisilinux.org + + + diff --git a/editor/texlive-bin/translations.xml b/editor/texlive-bin/translations.xml new file mode 100644 index 0000000000..d3e232f2eb --- /dev/null +++ b/editor/texlive-bin/translations.xml @@ -0,0 +1,14 @@ + + + + texlive-bin + TeX Live Dağıtımının Ana Parçası + texlive-bin Tex Live dağıtımının ana parçasıdır. + texlive-bin est la part essentiel de TeXLive. + + + + texlive-bin-devel + texlive-bin için geliştirme dosyaları + + diff --git a/pisi-index.xml b/pisi-index.xml index 87cf6d3115..9996420c04 100644 --- a/pisi-index.xml +++ b/pisi-index.xml @@ -7151,6 +7151,97 @@ + + + texlive-bin + http://www.tug.org/texlive + + PisiLinux Community + admins@pisilinux.org + + GPLv2 + data:doc + editor + Tex Live binaries + TeX Live Dağıtımının Ana Parçası + texlive-bin est la part essentiel de TeXLive. + Texlive binaries that are an essential part of TeXLive component. + texlive-bin Tex Live dağıtımının ana parçasıdır. + http://mirrors.edge.kernel.org/archlinux/other/texlive/texlive-bin-source-2018.47465.tar.xz + https://sourceforge.net/projects/biblatex-biber/files/biblatex-biber/2.13/binaries/Linux/biber-linux_x86_64.tar.gz + + poppler-devel + graphite2 + libpaper-devel + gd-devel + icu4c-devel + libXt-devel + t1lib-devel + ffcall-devel + libXaw-devel + libXmu-devel + libXpm-devel + libsigsegv-devel + clisp-devel + libXi-devel + ghostscript-devel + + editor/texlive-bin/pspec.xml + + + texlive-bin + + gd + zlib + icu4c + libXt + t1lib + libXi + ffcall + libX11 + libgcc + libpng + libXaw + libXmu + libXpm + freetype + graphite2 + fontconfig + libsigsegv + ghostscript + + + /usr/bin + /usr/lib + /usr/share/man + /usr/share/info + /usr/share + /usr/share/texmf-dist + /usr/share/tlpkg + /etc + + + + texlive-bin-devel + Development files for texlive-bin + texlive-bin için geliştirme dosyaları + + texlive-bin + + + /usr/include + + + + + 2020-03-21 + 2018.47465 + First release + Osman Erkan + osman.erkan@pisilinux.org + + + libmspub @@ -246182,43 +246273,6 @@ It supports email, address books, calendars, tasks, news feeds and much more. - - fatresize - A utility to resize FAT filesystems using libparted - A utility to resize FAT filesystems using libparted - Libparted kullanarak FAT dosya sistemlerini yeniden boyutlandırmak için bir yardımcı program - Libparted kullanarak FAT dosya sistemlerini yeniden boyutlandırmak için bir yardımcı program - library - unknown - GPLv3 - - - 2020-03-22 - 1.0.4 - First release - PisiLinux Community - admins@pisilinux.org - - - localhost - PisiLinux - 2.0 - x86_64 - 58101 - 19923 - 862e16ca60367bf74b7aeb478d31ee10f2a6325f - da39a3ee5e6b4b0d3255bfef95601890afd80709 - hardware/disk/fatresize/fatresize-1.0.4-1-p2-x86_64.pisi - 1.2 - - fatresize - https://github.com/ya-mouse/fatresize - - PisiLinux Community - admins@pisilinux.org - - - system FIXME diff --git a/pisi-index.xml.sha1sum b/pisi-index.xml.sha1sum index 6b5630e50c..e3c8f9aa8b 100644 --- a/pisi-index.xml.sha1sum +++ b/pisi-index.xml.sha1sum @@ -1 +1 @@ -f6806872e7aea2c73cdee0721a09f10ec44fdea7 \ No newline at end of file +b9513ecac659204f0887203a17a01686628a08f4 \ No newline at end of file diff --git a/pisi-index.xml.xz b/pisi-index.xml.xz index 8025e08aae..a18900a5df 100644 Binary files a/pisi-index.xml.xz and b/pisi-index.xml.xz differ diff --git a/pisi-index.xml.xz.sha1sum b/pisi-index.xml.xz.sha1sum index 35c510e531..48140a0d6f 100644 --- a/pisi-index.xml.xz.sha1sum +++ b/pisi-index.xml.xz.sha1sum @@ -1 +1 @@ -5f753ab563859cb20f663ea0de623bf1f69c51c4 \ No newline at end of file +4e4ad1c630fb9d3bc111a8110b97480f21b5dae7 \ No newline at end of file