Pisilinux/main
5
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
master
main/hardware/powermanagement/lm_sensors/files/42f240d2a457834bcbdf4dc8b57237f97b5f5854.patch
T
Rmys 9c4a84abb2 lm_sensors rebuild git ver.
2021-07-29 14:30:23 +03:00

1370 lines
38 KiB
Diff
Raw Permalink Blame History

diff -Nuar a/configs/ASRock/A300M-STX-DeskMini.conf b/configs/ASRock/A300M-STX-DeskMini.conf
--- a/configs/ASRock/A300M-STX-DeskMini.conf 1970-01-01 02:00:00.000000000 +0200
+++ b/configs/ASRock/A300M-STX-DeskMini.conf 2021-02-24 18:12:40.000000000 +0300
@@ -0,0 +1,93 @@
+# ASRock A300M-STX (as included in DeskMini A300 barebone)
+# manufacturing date April 2020 (came with UEFI BIOS 3.60)
+# board does have connectors for 2 fans (CPU_FAN1 and CPU_FAN2)
+# board does have a connector for intrusion detection
+# board does not have a speaker connector
+# dmesg: "nct6775: Found NCT6793D or compatible chip at 0x2e:0x290"
+
+chip "nct6793-*"
+
+ # board has no speaker connector
+ set beep_enable 0
+
+ # voltages
+ label in0 "Vcore"
+ compute in0 @*2, @/2
+ set in0_min 0.16
+ set in0_max 1.46
+
+ label in2 "AVCC"
+ set in2_min 3.30 * 0.90
+ set in2_max 3.30 * 1.10
+
+ label in3 "+3.3V"
+ set in3_min 3.30 * 0.90
+ set in3_max 3.30 * 1.10
+
+ label in7 "3VSB"
+ set in7_min 3.30 * 0.90
+ set in7_max 3.30 * 1.10
+
+ label in8 "VBAT"
+ set in8_min 3.00 * 0.90
+ set in8_max 3.30 * 1.10
+
+ label in9 "+12V"
+ compute in9 @*(53/8), @/(53/8)
+ set in9_min 12 * 0.90
+ set in9_max 12 * 1.10
+
+ label in13 "+5V"
+ compute in13 @*(24/8), @/(24/8)
+ set in13_min 5 * 0.90
+ set in13_max 5 * 1.10
+
+ # these have non-zero input, but are unknown
+ ignore in1
+ ignore in4
+ ignore in5
+ ignore in6
+ ignore in10
+ ignore in11
+ ignore in12
+ ignore in14
+
+ # temperatures
+ # not sure about temp2 and temp3
+ label temp2 "VRM(?) temp"
+ set temp2_max 75
+ set temp2_max_hyst 70
+
+ label temp3 "MB(?) temp"
+ set temp3_max 55
+ set temp3_max_hyst 50
+
+ label temp7 "CPU temp"
+
+ # other temps are zero or unreasonably high/low
+ ignore temp1
+ ignore temp4
+ ignore temp5
+ ignore temp6
+ ignore temp8
+ ignore temp9
+ ignore temp10
+
+ # fans
+ label fan2 "CPU_FAN1"
+ set fan2_min 500
+
+ label fan1 "CPU_FAN2"
+ set fan1_min 500
+
+ # these don't have connectors
+ ignore fan3
+ ignore fan4
+ ignore fan5
+
+ # intrusion
+ # the DeskMini A300 has an intrusion detection connector
+ # on board, but the case has no switch, so you might want to
+ # ignore these (don't know which one is actually connected)
+ label intrusion0 "intrusion0"
+ label intrusion1 "intrusion1"
diff -Nuar a/configs/ASRock/B450-Gaming-ITX-ac.conf b/configs/ASRock/B450-Gaming-ITX-ac.conf
--- a/configs/ASRock/B450-Gaming-ITX-ac.conf 1970-01-01 02:00:00.000000000 +0200
+++ b/configs/ASRock/B450-Gaming-ITX-ac.conf 2021-02-24 18:12:40.000000000 +0300
@@ -0,0 +1,100 @@
+# ASRock B450 Gaming-ITX/ac
+# manufacturing date July 2019 (came with Zen2-aware BIOS)
+# board does have connectors for buzzer and 3 fans (2 case + 1 CPU)
+# board does not have a connector for intrusion detection
+# dmesg: "nct6775: Found NCT6792D or compatible chip at 0x2e:0x290"
+
+chip "nct6792-*"
+
+ # beeping appears to not work
+ set beep_enable 1
+
+ # voltages
+
+ label in0 "Vcore"
+ compute in0 @*2, @/2
+ set in0_min 0.16
+ set in0_max 1.46
+ set in0_beep 1
+
+ label in2 "AVCC"
+ set in2_min 3.30 * 0.90
+ set in2_max 3.30 * 1.10
+
+ label in3 "+3.3V"
+ set in3_min 3.30 * 0.90
+ set in3_max 3.30 * 1.10
+
+ label in7 "3VSB"
+ set in7_min 3.30 * 0.90
+ set in7_max 3.30 * 1.10
+
+ label in8 "VBAT"
+ set in8_min 3.00 * 0.90
+ set in8_max 3.30 * 1.10
+
+ label in9 "+12V"
+ compute in9 @*(53/8), @/(53/8)
+ set in9_min 12 * 0.90
+ set in9_max 12 * 1.10
+
+ label in13 "+5V"
+ compute in13 @*(24/8), @/(24/8)
+ set in13_min 5 * 0.90
+ set in13_max 5 * 1.10
+
+ # these are all zero
+ ignore in1
+ ignore in4
+ ignore in5
+ ignore in6
+ ignore in14
+
+ # these have non-zero input, but are unknown
+ ignore in10
+ ignore in11
+ ignore in12
+
+ # temperatures
+ # not sure about temp2 and temp3
+ label temp2 "VRM(?) temp"
+ set temp2_max 55
+ set temp2_max_hyst 50
+ set temp2_beep 1
+ label temp3 "MB(?) temp"
+ set temp3_max 55
+ set temp3_max_hyst 50
+ set temp3_beep 1
+ label temp7 "CPU temp"
+
+ # temp2 has similar readings to temp3
+ # other temps are zero or unreasonably high/low
+ ignore temp1
+ ignore temp4
+ ignore temp5
+ ignore temp6
+ ignore temp8
+ ignore temp9
+ ignore temp10
+
+ # fans
+
+ label fan1 "CHA_FAN1"
+ set fan1_min 300
+ set fan1_beep 1
+ label fan2 "CPU_FAN1"
+ set fan2_min 600
+ set fan2_beep 1
+ label fan3 "CHA_FAN2"
+ set fan3_min 300
+ set fan3_beep 1
+
+ # these are not on the mainboard
+ ignore fan4
+ ignore fan5
+
+ # misc
+
+ ignore intrusion0
+ ignore intrusion1
+
diff -Nuar a/configs/ASRock/Z390-Extreme4.conf b/configs/ASRock/Z390-Extreme4.conf
--- a/configs/ASRock/Z390-Extreme4.conf 1970-01-01 02:00:00.000000000 +0200
+++ b/configs/ASRock/Z390-Extreme4.conf 2021-02-24 18:12:40.000000000 +0300
@@ -0,0 +1,107 @@
+# ASRock Z3900 Extreme4
+# 2019, contributed by Alex Cherkayev <doctor64@gmail.com>
+#
+# dmi: board_name: Z390 Extreme4
+# dmi: board_vendor: ASRock
+# dmi: bios_version: P4.00
+# cpu: Intel(R) Core(TM) i7-9700K CPU
+chip "nct6791-isa-*"
+
+ # Fans
+ label fan1 "CHA Fan 3/WP"
+ label fan2 "CPU Fan 1"
+ label fan3 "CPU Fan 2/WP"
+ label fan4 "CHA Fan 1/WP"
+ label fan5 "CHA Fan 2/WP"
+
+ # Temperatures
+ label temp1 "Motherboard"
+ set temp1_max 55
+ set temp1_max_hyst 50
+ label temp2 "CPU MB"
+ set temp2_max 100
+ set temp2_max_hyst 75
+
+ # temp3 always 22
+ # temp4 102 in idle, 103 under load
+ # temp5 always 15
+ # temp6 always 12
+ ignore temp3
+ ignore temp4
+ ignore temp5
+ ignore temp6
+
+ #PECI Agent 0 match CPU cores temp
+ label temp7 "CPU Core"
+
+ # PCH_CHIP_CPU_MAX_TEMP PCH_CHIP_TEMP PCH_CPU_TEMP always 0.0C, ignore
+ ignore temp8
+ ignore temp9
+ ignore temp10
+
+ # Voltages
+
+ label in0 "VCore Voltage"
+ compute in0 @*2, @/2
+ set in0_min 0.40
+ set in0_max 1.40
+
+ label in1 "+5V"
+ # deduced, not confirmed
+ compute in1 ((20/10)+1)*@, @/((20/10)+1)
+ set in1_min 5 * 0.95
+ set in1_max 5 * 1.05
+
+ label in4 "+12V"
+ # deduced, not confirmed
+ compute in4 @*12, @/12
+ set in4_min 12 * 0.95
+ set in4_max 12 * 1.05
+
+ #unknown, always 1.18V just set limits to remove alarm
+ set in5_min 1.1
+ set in5_max 1.3
+
+ label in6 "PCH +1.0V"
+ # limit taken from intel 300 series pch datasheet
+ # set in6_min 0.99
+ # set in6_max 1.10
+ # verified by changing in bios, limit taken from bios
+ set in6_min 0.9
+ set in6_max 1.3
+
+ label in9 "VCCST"
+ # verified by changing in bios, limit taken from bios
+ set in9_min 0.9
+ set in9_max 1.25
+
+ # unknown, always 0.24V, just set limit to remove alarm
+ set in10_min 0.1
+ set in10_max 0.3
+
+ label in11 "VCCIO"
+ # verified by changing in bios, limit taken from bios
+ # limit taken from bios
+ set in11_min 0.85
+ set in11_max 1.35
+
+ label in12 "DRAM Voltage"
+ # verified by changing in bios, limit taken from bios
+ set in12_min 1.10
+ set in12_max 1.40
+
+ label in13 "DRAM VPP"
+ # verified by changing in bios, limit taken from bios +- 0.1V
+ compute in13 @*2, @/2
+ set in13_min 2.4
+ set in13_max 2.8
+
+ label in14 "VCCSA"
+ # verified by changing in bios, limit taken from bios
+ set in14_min 0.95
+ set in14_max 1.35
+
+ # Potential things to filter
+ # These inputs are unused unless you have a case intrusion switch connected.
+ # ignore intrusion0
+ # ignore intrusion1
diff -Nuar a/configs/ASRock/Z390M-ITX-ac.conf b/configs/ASRock/Z390M-ITX-ac.conf
--- a/configs/ASRock/Z390M-ITX-ac.conf 1970-01-01 02:00:00.000000000 +0200
+++ b/configs/ASRock/Z390M-ITX-ac.conf 2021-02-24 18:12:40.000000000 +0300
@@ -0,0 +1,162 @@
+# Board: ASRock Z390M-ITX/ac
+# Contributed by: Aaron Bockelie
+# Processor: Intel(R) Core(TM) i7-8700 CPU @ 3.20GHz (6/158/10)
+# Board has connectors for buzzer and 3 fans (2 case + 1 CPU)
+# board does not have a connector for intrusion detection
+# dmesg: "nct6775: Found NCT6793D or compatible chip at 0x2e:0x290"
+
+chip "nct6793-*"
+
+ # Cross referenced with ASRock A-Tuning Application on 6/29/2020
+ # Install in Windows and see /Program Files (x86)/ASRock Utility/A-Tuning/Conf/Z390MITX.xml
+ # There is also an NCT3933U on the board for measuring the PCH and VCCST voltages, but it
+ # is not accessible due to no kernel driver for it.
+
+ # Referenced from NCT677xF (NCT6793D) Data Sheet Page 57
+ # All the internal inputs of the ADC, AVSB, VBAT, 3VSB, and 3VCC utilize an integrated voltage
+ # divider with both resistors equal to 34K, yielding a voltage one half of the power supply.
+ # Vin = VCC * (34K/(34K+34K)=1.65V where VCC is set to 3.3V
+
+ # ID NCTSpec NCTDesc ASRock Utility Description
+ # in0 index80 CPUVCORE CPU_INPUT_V (Interface IR35201)
+ # in1 index81 VIN1 <none>
+ # in2 index82 AVSB <none>
+ # in3 index83 3VCC P3P3_V
+ # in4 index84 VIN0 <none>
+ # in5 N/A N/A N/A
+ # in6 index86 VIN4 SIO3_V
+ # in7 index87 3VSB <none>
+ # in8 index88 VBAT <none>
+ # in9 index89 VTT <none>
+ # in10 index8a VIN5 <none>, SIO6_V
+ # in11 index8b VIN6 <none>, SIO4_V
+ # in12 index8c VIN2 P12_V, SIO1_V
+ # in13 index8d VIN3 P5P0_V, SIO2_V
+ # in14 index8e VIN7 SIO5_V
+
+
+ set beep_enable 1
+
+ # voltages
+ # The CPUVCORE pin feeds directly into the ADC with no voltage divider since the nominal
+ # voltage on this pin is only 1.2V
+
+ label in0 "Vcore"
+ compute in0 @*2, @/2
+ set in0_min 0.16
+ set in0_max 1.48
+ set in0_beep 1
+
+ ignore in1
+
+ label in2 "AVCC"
+ set in2_min 3.30 * 0.90
+ set in2_max 3.30 * 1.10
+
+ label in3 "+3.3V"
+ set in3_min 3.30 * 0.90
+ set in3_max 3.30 * 1.10
+
+ ignore in4
+
+ ignore in5
+
+ ignore in6
+
+ label in7 "3VSB"
+ set in7_min 3.30 * 0.90
+ set in7_max 3.30 * 1.10
+
+ # This is the CMOS battery.
+
+ label in8 "VBATT"
+ set in8_min 3.3 * 0.75
+ set in8_max 3.3 * 1.10
+
+ label in9 "VTT"
+ set in9_min 1.2 * 0.90
+ set in9_max 1.2 * 1.25
+
+ ignore in10
+
+ ignore in11
+
+ label in12 "+12V"
+ #((56+10)/10)
+ compute in12 @*6.6, @/6.6
+ set in12_min 12 * 0.95
+ set in12_max 12 * 1.05
+
+ label in13 "+5V"
+ compute in13 @*(24/8), @/(24/8)
+ set in13_min 5 * 0.90
+ set in13_max 5 * 1.10
+
+ ignore in14
+
+
+ # temperatures
+ # see NCT677xF (NCT6793D) Data Sheet Section 8.5.3.4 Temperature Reading
+ # a customized nct6775 kernel driver is probably needed to reference the bank measurement method correctly
+ # it appears that the temp sensor registers are off by one with the default driver
+ # so SYSTIN is offset incorrectly and referenced as one of the AUXTIN values.
+
+ # I have interpeted the NCT spec as
+ # ID NCTSpec Other Notes
+ # temp1 SYSTIN Incorrect driver mapping of AUXTIN0
+ # temp2 CPUTIN Actual CPU temperature verified physically
+ # temp3 AUXTIN0 Actual motherboard temperature verified physically
+ # temp4 AUXTIN1 Unused
+ # temp5 AUXTIN2 Unused
+ # temp6 AUXTIN3 Unused
+
+ ignore temp1
+
+ label temp2 "CPU"
+ set temp2_max 85
+ set temp2_max_hyst 50
+ #set temp2_beep 1
+
+ label temp3 "MB"
+ set temp3_max 75
+ set temp3_max_hyst 50
+ #set temp3_beep 1
+
+ ignore temp4
+
+ ignore temp5
+
+ ignore temp6
+
+ label temp7 "CPU_PECI"
+ set temp7_max 85
+ set temp7_max_hyst 50
+ #set temp7_beep 1
+
+ ignore temp8
+ ignore temp9
+ ignore temp10
+
+ # fans
+ # thankfully, fan PWM counters seem to function out of the box.
+ # labels are based on the board documentation
+
+ label fan1 "Chassis_Fan_1/Pump"
+ set fan1_min 300
+ set fan1_beep 1
+
+ label fan2 "CPU_Fan_1"
+ set fan2_min 600
+ set fan2_beep 1
+
+ label fan5 "Chassis_Fan_2"
+ set fan5_min 300
+ set fan5_beep 1
+
+ # these are not on the mainboard
+ ignore fan3
+ ignore fan4
+
+ # misc
+ #intrusion0 is actually available. When disabled in BIOS it returns OK
+ ignore intrusion1
diff -Nuar a/configs/Asus/P10S-M_WS.conf b/configs/Asus/P10S-M_WS.conf
--- a/configs/Asus/P10S-M_WS.conf 1970-01-01 02:00:00.000000000 +0200
+++ b/configs/Asus/P10S-M_WS.conf 2021-02-24 18:12:40.000000000 +0300
@@ -0,0 +1,61 @@
+# Asus P10S-M WS
+chip "nct6791-*"
+ ignore temp1 # -62.0 all the time
+ ignore temp2 # -45.0
+ ignore temp3 # 23.0 all the time
+ ignore temp4 # 26.0 all the time
+ ignore temp6 # -62.0
+ # temp8 - temp10 always 0
+ ignore temp8
+ ignore temp9
+ ignore temp10
+ label temp7 "CPU"
+ label temp5 "MB"
+
+ label in0 "VCORE"
+
+ ignore in2 # same as in3
+ ignore in5 # 2040 all the time
+ ignore in11 # same as VCCIO (in9)
+ ignore in13 # same as in9
+ ignore in14 # 2040 all the time
+
+ label in1 "+5V"
+ compute in1 @ * 5, @ / 5
+ set in1_min 5 * 0.95
+ set in1_max 5 * 1.05
+
+ label in3 "+3.3V"
+ set in3_min 3.3 * 0.95
+ set in3_max 3.3 * 1.05
+
+ label in4 "+12V"
+ compute in4 @ * 12, @ / 12
+ set in4_min 12 * 0.95
+ set in4_max 12 * 1.05
+
+ label in6 "VCCSA"
+
+ label in7 "+3.3VSB"
+ set in7_min 3.3 * 0.95
+ set in7_max 3.3 * 1.05
+
+ label in9 "VCCIO"
+
+ label in10 "+5VSB"
+ compute in10 @ * 5, @ / 5
+ set in10_min 5 * 0.95
+ set in10_max 5 * 1.05
+
+ label in12 "VDDQ_AB_CPU1"
+
+ label fan1 "REAR_FAN"
+ label fan2 "CPU_FAN1"
+ label fan3 "FRNT_FAN1"
+ label fan4 "FRNT_FAN2"
+ label fan5 "FRNT_FAN3"
+ label fan6 "FRNT_FAN4"
+
+ #ignore intrusion0
+ #ignore intrusion1
+ ignore beep_enable
diff -Nuar a/configs/Asus/TUF-GAMING-X570-PLUS.conf b/configs/Asus/TUF-GAMING-X570-PLUS.conf
--- a/configs/Asus/TUF-GAMING-X570-PLUS.conf 1970-01-01 02:00:00.000000000 +0200
+++ b/configs/Asus/TUF-GAMING-X570-PLUS.conf 2021-02-24 18:12:40.000000000 +0300
@@ -0,0 +1,61 @@
+chip "nct6798-*"
+# nct6798 values for Asus TUF GAMING X570-PLUS (WI-FI)
+# I'm not entirely sure everything here is correct since no HW monitoring
+# application under Windows shows all the names for all the found sensors.
+# Some of the names and formulas are best guesstimates and could be wrong.
+# You will have to unignore fans if you want them to be monitored.
+
+label in0 "Vcore"
+ set in0_min 0.2
+ set in0_max 1.5
+
+label in2 "AVSB"
+ set in2_min 3.3 * 0.95
+ set in2_max 3.3 * 1.05
+
+label in3 "3VCC"
+ set in3_min 3.3 * 0.95
+ set in3_max 3.3 * 1.05
+
+label in4 "+12V"
+ compute in4 @ * 12, @ / 12
+ set in4_min 12 * 0.95
+ set in4_max 12 * 1.05
+
+label in6 "+5V"
+ compute in6 @ * 5, @ / 5
+ set in6_min 5 * 0.95
+ set in6_max 5 * 1.05
+
+label in7 "3.3V"
+ set in7_min 3.3 * 0.95
+ set in7_max 3.3 * 1.05
+
+label in8 "Vbat"
+ set in8_min 3.3 * 0.95
+ set in8_max 3.3 * 1.05
+
+# always shows a constant value after boot - either 0.272 or 0.288
+ignore in10
+
+# constant 0.544
+ignore in11
+
+# constant 1.032
+ignore in12
+
+label fan2 "CPU Fan"
+ set fan2_min 200
+
+# The X570 chipset is quite power hungry, so let's put 1000 in to be safe
+label fan5 "CHA_FAN1"
+ set fan5_min 1000
+
+# Always show zeros
+ignore temp8
+ignore temp9
+ignore temp10
+
+# The motherboard doesn't seem to have them physically connected or present
+ignore intrusion0
+ignore intrusion1
diff -Nuar a/configs/Biostar/A960D+V2.conf b/configs/Biostar/A960D+V2.conf
--- a/configs/Biostar/A960D+V2.conf 1970-01-01 02:00:00.000000000 +0200
+++ b/configs/Biostar/A960D+V2.conf 2021-02-24 18:12:40.000000000 +0300
@@ -0,0 +1,51 @@
+# Configuration file contributed by Leandro Nini.
+
+
+# libsensors configuration file
+# -----------------------------
+#
+# This is a first attempt at a custom configuration file for the Biostar A960D+V2.
+# This custom configuration file should be copied to /etc/sensors.d/Biostar-A960D+V2.conf.
+#
+# Custom configuration files for some specific mainboards can be found at
+# https://github.com/lm-sensors/lm-sensors/tree/master/configs
+
+# READ THE MAN PAGE DOCUMENTATION OF 'sensors.conf' FOR MORE
+# COMPLETE INFORMATION. ie:
+
+# man sensors.conf
+
+chip "it8728-*"
+
+# All labels set to match Biostar A960D+V2 BIOS displayed labels. See
+# the 'PC Health' screen in the BIOS.
+
+# Voltage settings
+
+ label in0 "CPU"
+ label in1 "DDR"
+ label in2 "+12V"
+ label in3 "+5V"
+ ignore in4
+ ignore in5
+ label in6 "Chip"
+
+ compute in2 6.0*@,@/6.0
+ compute in3 ((15/10)+1)*@ , @/((15/10)+1)
+
+# Fan settings
+
+ label fan1 "CPU Fan"
+ label fan2 "Sys1 Fan"
+ ignore fan3
+
+# Temperature sensor settings
+
+ label temp1 "CPU Temp"
+ label temp3 "Sys Temp"
+
+# temp2 is not identified
+ ignore temp2
+
+ ignore intrusion0
+
diff -Nuar a/configs/Gigabyte/GA-AB350-GAMING.conf b/configs/Gigabyte/GA-AB350-GAMING.conf
--- a/configs/Gigabyte/GA-AB350-GAMING.conf 2019-10-17 18:43:18.000000000 +0300
+++ b/configs/Gigabyte/GA-AB350-GAMING.conf 2021-02-24 18:12:40.000000000 +0300
@@ -21,6 +21,12 @@
label in0 "CPU Vcore"
label in6 "DRAM Channel A/B"
+ ignore in1
+ ignore in2
+ ignore in3
+ ignore in4
+ ignore in5
+
# A configuration for the Super-IO chip it8792 can be taken from the configuration
# file for the board GA-AB350-GAMING3 but has not been checked for this board
@@ -29,3 +35,10 @@
ignore fan2
ignore fan3
+ ignore in0
+ ignore in1
+ ignore in2
+ ignore in3
+ ignore in4
+ ignore in5
+ ignore in6
diff -Nuar a/configs/Gigabyte/GA-AB350N-GAMING-WIFI-REV1.0.conf b/configs/Gigabyte/GA-AB350N-GAMING-WIFI-REV1.0.conf
--- a/configs/Gigabyte/GA-AB350N-GAMING-WIFI-REV1.0.conf 1970-01-01 02:00:00.000000000 +0200
+++ b/configs/Gigabyte/GA-AB350N-GAMING-WIFI-REV1.0.conf 2021-02-24 18:12:40.000000000 +0300
@@ -0,0 +1,91 @@
+# GA-AB350N-Gaming WIFI (rev. 1.0)
+
+# dmi: board_name: AB350N-Gaming WIFI-CF
+# dmi: board_vendor: Gigabyte Technology Co., Ltd.
+# dmi: board_version: x.x
+# dmi: bios_version: F50a
+
+chip "it8686-isa-0a40"
+ label temp1 "System 1"
+ label temp2 "Chipset"
+ label temp3 "CPU Socket"
+ label temp4 "PCI-EX16"
+ label temp5 "VRM MOS"
+ label temp6 "vSOC MOS"
+
+ label in0 "CPU Vcore"
+ label in1 "+3.3v"
+ label in2 "+12v"
+ label in3 "+5v"
+ label in4 "CPU Vcore SOC"
+ label in5 "CPU VDDP"
+ label in6 "DRAM A/B"
+ label in7 "3VSB"
+ label in8 "Battery"
+
+ label fan1 "CPU_FAN"
+ label fan2 "SYS_FAN1"
+
+ compute in1 @*1.650,@/1.650
+ compute in2 @*6,@/6
+ compute in3 @*2.5,@/2.5
+
+ set temp1_min 15
+ set temp1_max 65
+ set temp2_min 15
+ set temp2_max 80
+ set temp3_min 15
+ set temp3_max 85
+ set temp4_min 15
+ set temp4_max 30
+ set temp5_min 15
+ set temp5_max 95
+ set temp6_min 15
+ set temp6_max 90
+
+ set in0_min 0.6
+ set in0_max 1.45
+ set in1_min 3.135
+ set in1_max 3.465
+ set in2_min 11.400
+ set in2_max 12.600
+ set in3_min 4.750
+ set in3_max 5.250
+ set in6_min 1.2 * 0.97
+ set in6_max 1.2 * 1.2
+ set in7_min 3.3 * 0.97
+ set in7_max 3.3 * 1.05
+
+ set fan1_min 900
+ set fan2_min 900
+
+chip "it8792-isa-0a60"
+ label temp1 "PCI-EX8"
+ label temp2 "Temp 2"
+ label temp3 "System 2"
+
+ label in0 "CPU Vcore"
+ label in1 "DDR VTT"
+ label in2 "Chipset Core"
+ label in3 "VIN3"
+ label in4 "CPU VDD18"
+ label in5 "DDR VPP"
+ label in7 "3VSB"
+ label in8 "VBAT"
+
+ set temp1_min 15
+ set temp1_max 60
+ set temp2_min 15
+ set temp2_max 60
+ set temp3_min 15
+ set temp3_max 60
+
+ set in0_min 0.6
+ set in0_max 1.45
+ set in7_min 3.135
+ set in7_max 3.465
+
+ ignore in6
+ ignore fan1
+ ignore fan2
+ ignore fan3
diff -Nuar a/configs/Gigabyte/GA-H170M-D3H.conf b/configs/Gigabyte/GA-H170M-D3H.conf
--- a/configs/Gigabyte/GA-H170M-D3H.conf 1970-01-01 02:00:00.000000000 +0200
+++ b/configs/Gigabyte/GA-H170M-D3H.conf 2021-02-24 18:12:40.000000000 +0300
@@ -0,0 +1,30 @@
+# Configuration for the Gigabyte GA-H170M-D3H (name from the manual) mainboard.
+# Name from dmidecode -s baseboard-product-name: H170M-D3H-CF
+# BIOS version: F23f
+# Driver: it87
+# added by dokutan, 2020
+
+chip "it8628-isa-*"
+
+ ### voltage sensors
+ ### these labels are mostly determined by comparing the values to the values from the bios
+ # in1 - 1n5: i have no clue, the bios reports +5V and +12V values,
+ # the it87 kernel documentation suggests in3 might be internal to the chip
+ # label in0 "Vcore" # this value scales with CPU load but seems a bit low (~0.7V to 1.2V)
+ # label in2 "+12V" # in2*6 is exactly the +12V value from the bios
+ label in6 "Vmemory" # this is stable and the value from the bios
+
+ ### fans
+ ### the mappings fan to label are all tested
+ label fan1 "CPU fan"
+ label fan2 "Case fan 1"
+ label fan3 "Case fan 2"
+ ignore fan4 # there are only 3 fan headers + CPU fan on this mainboard
+ label fan5 "Case fan 3"
+
+ ### temperature sensors
+ ### these labels are determined by comparison with other sensors under different load scenarios
+ # temp5 correlates with CPU temp, but stays significantly lower
+ # temp1, temp4 and temp6 stay relatively low, even under CPU load
+ ignore temp2 # this always gives a reading of +127.0°C
+ label temp3 "CPU temp" # this might have a 1-2°C difference to the coretemp package sensor
diff -Nuar a/configs/Lenovo/ThinkPad-T490s-i7.conf b/configs/Lenovo/ThinkPad-T490s-i7.conf
--- a/configs/Lenovo/ThinkPad-T490s-i7.conf 1970-01-01 02:00:00.000000000 +0200
+++ b/configs/Lenovo/ThinkPad-T490s-i7.conf 2021-02-24 18:12:40.000000000 +0300
@@ -0,0 +1,41 @@
+chip "ucsi_source_psy_USBC000:001-isa-*"
+ label in0 "Voltage"
+ label curr1 "Current"
+
+chip "pch_cannonlake-virtual-0"
+ label temp1 "Chipset"
+
+chip "BAT0-*"
+ label in0 "Internal battery"
+
+chip "ucsi_source_psy_USBC000:002-isa-*"
+ label in0 "Voltage"
+ label curr1 "Current"
+
+chip "iwlwifi_1-*"
+ label temp1 "WiFi Card"
+
+# The following labeling found here:
+# https://www.kernel.org/doc/html/latest/admin-guide/laptops/thinkpad-acpi.html#temperature-sensors
+chip "thinkpad-isa-*"
+ label fan1 "Fan speed"
+ label temp1 "Case (near CPU)"
+ label temp5 "Main battery: main sensor"
+ label temp11 "Power regulator"
+
+ ignore temp2
+ ignore temp3
+ ignore temp4
+ ignore temp6
+ ignore temp7
+ ignore temp8
+ ignore temp9
+ ignore temp10
+ ignore temp12
+ ignore temp13
+ ignore temp14
+ ignore temp15
+ ignore temp16
+
+chip "acpitz-acpi-*"
+ label temp1 "Case (ACPI thermal zone)"
diff -Nuar a/configs/Lenovo/ThinkPad-X1-Carbon.conf b/configs/Lenovo/ThinkPad-X1-Carbon.conf
--- a/configs/Lenovo/ThinkPad-X1-Carbon.conf 1970-01-01 02:00:00.000000000 +0200
+++ b/configs/Lenovo/ThinkPad-X1-Carbon.conf 2021-02-24 18:12:40.000000000 +0300
@@ -0,0 +1,22 @@
+# Tested with Lenovo ThinkPad X1 Carbon Gen 6
+
+chip "thinkpad-isa-0000"
+ # always zero
+ ignore temp2
+ ignore temp3
+ ignore temp4
+ ignore temp5
+ ignore temp6
+ ignore temp7
+ ignore temp8
+ ignore temp9
+ ignore temp10
+ ignore temp12
+ ignore temp13
+ ignore temp14
+ ignore temp15
+ ignore temp16
+
+ label fan1 "Fan"
+ label temp1 "CPU"
+ label temp11 "Power circuitry"
diff -Nuar a/configs/Lenovo/ThinkPad-X260-i5.conf b/configs/Lenovo/ThinkPad-X260-i5.conf
--- a/configs/Lenovo/ThinkPad-X260-i5.conf 1970-01-01 02:00:00.000000000 +0200
+++ b/configs/Lenovo/ThinkPad-X260-i5.conf 2021-02-24 18:12:40.000000000 +0300
@@ -0,0 +1,31 @@
+chip "iwlwifi_1-*"
+ label temp1 "WiFi Card"
+
+chip "thinkpad-isa-*"
+ label fan1 "Fan Speed"
+ label temp1 "Case (near CPU)"
+
+ ignore temp2
+ ignore temp3
+ ignore temp4
+ ignore temp5
+ ignore temp6
+ ignore temp7
+ ignore temp8
+
+chip "BAT0-*"
+ label in0 "Internal Battery"
+
+chip "BAT1-*"
+ label in0 "Removable Battery"
+
+chip "coretemp-isa-*"
+ label temp1 "CPU Package"
+ label temp2 "CPU Core 0"
+ label temp3 "CPU Core 1"
+
+chip "pch_skylake-*"
+ label temp1 "Chipset/Southbridge"
+
+chip "acpitz-acpi-*"
+ label temp1 "Case (ACPI Thermal Zone)"
diff -Nuar a/configs/MSI/MS-7B89-B450M-MORTAR.conf b/configs/MSI/MS-7B89-B450M-MORTAR.conf
--- a/configs/MSI/MS-7B89-B450M-MORTAR.conf 1970-01-01 02:00:00.000000000 +0200
+++ b/configs/MSI/MS-7B89-B450M-MORTAR.conf 2021-02-24 18:12:40.000000000 +0300
@@ -0,0 +1,100 @@
+# MS-7B89 B450-MORTAR config
+#
+# Based on MS-7A34 B350-TOMAHAWK config
+# unknown labels taken from MS-7B79 X470 GAMING PRO config
+#
+# Tested on a B450M Mortar Titanium board,
+# but it shares the same ID with the B450M Mortar board.
+
+chip "nct6797-*"
+ label in0 "Vcore"
+ set in0_min 0.4
+ set in0_max 1.45 # max recommended voltage
+
+ label in1 "ATX 5V"
+ compute in1 ((12 / 3) + 1) * @, @ / ((12 / 3) + 1)
+ set in1_min 5 * 0.95
+ set in1_max 5 * 1.05
+
+ label in2 "AVCC Analog"
+ set in2_min 3.3 * 0.95 # assume ATX ±5% is enough
+ set in2_max 3.3 * 1.05 # assume ATX ±5% is enough
+
+ label in3 "ATX 3.3V"
+ set in3_min 3.3 * 0.95 # ATX 2.4
+ set in3_max 3.3 * 1.05 # ATX 2.4
+
+ label in4 "ATX 12V"
+ compute in4 ((220 / 20) + 1) * @, @ / ((220 / 20) + 1)
+ set in4_min 12 * 0.95
+ set in4_max 12 * 1.05
+
+ # no VIN8 input in this chip?
+ ignore in5
+
+ # likely AUXTIN0 thermistor
+ ignore in6
+
+ label in7 "3VSB Standby"
+ set in7_min 3.3 * 0.95 # assume ATX ±5% is enough
+ set in7_max 3.3 * 1.05 # assume ATX ±5% is enough
+
+ label in8 "RTC Battery"
+ set in8_min 2.0 # from Intel 200-series chipset spec
+ set in8_max 3.4 # from random CR2032 datasheet
+
+ label in9 "CPU 1.8V"
+ set in9_min 1.82 * 0.90
+ set in9_max 1.82 * 1.10
+
+ # might read as 0V if a CPU without iGPU is installed
+ label in10 "CPU VDDP"
+
+ # likely AUXTIN2 thermistor
+ ignore in11
+
+ label in12 "Vsoc"
+ set in12_min 0.8
+ set in12_max 1.45 #max rating
+
+ label in13 "Vdram"
+ compute in13 2 * @, @ / 2
+ set in13_min 1.1 # DDR min voltage
+ set in13_max 1.5 # DDR max voltage
+
+ label in14 "5VSB Standby"
+ compute in14 ((768 / 330) + 1) * @, @ / ((768 / 330) + 1)
+ set in14_min 5 * 0.95
+ set in14_max 5 * 1.05
+
+
+ ignore fan1
+ label fan2 "CPU 1"
+ label fan3 "SYSTEM 1"
+ label fan4 "SYSTEM 2"
+ label fan5 "SYSTEM 3"
+
+
+ label temp1 "Super I/O"
+ label temp2 "SoC VRM"
+ label temp3 "CPU VRM"
+
+ # AUXTIN1 is used as VIN5
+ ignore temp4
+
+ # Termistor Chipset?
+ label temp5 "PCH"
+
+ # AUXTIN3 is used as VIN7
+ ignore temp6
+
+ # the same temperature as reported by k10temp
+ label temp7 "CPU die"
+
+ # stuck at 0°C
+ ignore temp8
+ ignore temp9
+ ignore temp10
+
+ # likely DEEP_S5 signal
+ ignore intrusion1
diff -Nuar a/lib/sysfs.c b/lib/sysfs.c
--- a/lib/sysfs.c 2019-10-17 18:43:18.000000000 +0300
+++ b/lib/sysfs.c 2021-02-24 18:12:40.000000000 +0300
@@ -663,7 +663,7 @@
if ((!subsys || !strcmp(subsys, "platform") ||
!strcmp(subsys, "of_platform"))) {
/* must be new ISA (platform driver) */
- if (sscanf(dev_name, "%*[a-z0-9_].%d", &entry->chip.addr) != 1)
+ if (sscanf(dev_name, "%*[a-zA-Z0-9_]%*1[.:]%d", &entry->chip.addr) != 1)
entry->chip.addr = 0;
entry->chip.bus.type = SENSORS_BUS_TYPE_ISA;
entry->chip.bus.nr = 0;
@@ -938,7 +938,7 @@
if (res == EOF) {
if (errno == EIO)
return -SENSORS_ERR_IO;
- else
+ else
return -SENSORS_ERR_ACCESS_R;
}
*value /= get_type_scaling(subfeature->type);
@@ -972,7 +972,7 @@
if (res == EOF) {
if (errno == EIO)
return -SENSORS_ERR_IO;
- else
+ else
return -SENSORS_ERR_ACCESS_W;
}
} else
diff -Nuar a/prog/detect/sensors-detect b/prog/detect/sensors-detect
--- a/prog/detect/sensors-detect 2019-10-17 18:43:18.000000000 +0300
+++ b/prog/detect/sensors-detect 2021-02-24 18:12:40.000000000 +0300
@@ -38,7 +38,7 @@
#########################
use constant NO_CACHE => 1;
-use constant LM_VERSION => '3.6.0';
+use constant LM_VERSION => '3.6.0+git';
use vars qw(@pci_adapters @chip_ids @ipmi_ifs @non_hwmon_chip_ids
$i2c_addresses_to_scan @i2c_byte_cache %opt);
@@ -719,11 +719,6 @@
i2c_addrs => [0x2c..0x2e],
i2c_detect => sub { emc6w201_detect(@_); },
}, {
- name => "Winbond WPCD377I",
- driver => "not-a-sensor",
- i2c_addrs => [0x2c..0x2e],
- i2c_detect => sub { lm85_detect(@_, 7); },
- }, {
name => "Analog Devices ADT7462",
driver => "adt7462",
i2c_addrs => [0x5c, 0x58],
@@ -1392,6 +1387,11 @@
i2c_addrs => [0x73],
i2c_detect => sub { fsc_detect(@_, 7); },
}, {
+ name => "FTS Teutates",
+ driver => "ftsteutates",
+ i2c_addrs => [0x73],
+ i2c_detect => sub { fts_detect(@_); },
+ }, {
name => "ALi M5879",
driver => "to-be-written",
i2c_addrs => [0x2c..0x2d],
@@ -1679,6 +1679,10 @@
i2c_addrs => [0x2c..0x2f],
i2c_detect => sub { w83791sd_detect(@_); },
}, {
+ name => "Winbond WPCD377I",
+ i2c_addrs => [0x2c..0x2e],
+ i2c_detect => sub { lm85_detect(@_, 7); },
+ }, {
name => "Fintek F75111R/RG/N (GPIO)",
i2c_addrs => [0x37, 0x4e],
i2c_detect => sub { fintek_detect(@_, 1); },
@@ -2268,7 +2272,7 @@
features => FEAT_IN | FEAT_FAN | FEAT_TEMP,
}, {
name => "Nuvoton W83677HG-I (NCT5572D/NCT6771F/NCT6772F/NCT6775F) Super IO Sensors",
- driver => "w83627ehf",
+ driver => sub { kernel_version_at_least(3, 10, 0) ? "nct6775" : "w83627ehf" },
devid => 0xB470,
devid_mask => 0xFFF0,
logdev => 0x0b,
@@ -2285,6 +2289,13 @@
logdev => 0x0b,
features => FEAT_IN | FEAT_FAN | FEAT_TEMP,
}, {
+ name => "Nuvoton NCT6687D eSIO",
+ driver => "nct6683",
+ devid => 0xD590,
+ devid_mask => 0xFFF0,
+ logdev => 0x0b,
+ features => FEAT_IN | FEAT_FAN | FEAT_TEMP,
+ }, {
name => "Nuvoton NCT6102D/NCT6104D/NCT6106D Super IO Sensors",
driver => "nct6775",
devid => 0xC450,
@@ -2807,6 +2818,10 @@
driver => "k10temp",
detect => sub { hygon_pci_detect('1463') },
}, {
+ name => "AMD Family 19h thermal sensors",
+ driver => "k10temp",
+ detect => sub { amd_pci_detect('1653') },
+ }, {
name => "Intel digital thermal sensor",
driver => "coretemp",
detect => \&coretemp_detect,
@@ -4569,7 +4584,9 @@
sub chip_special_cases
{
# Some chip to driver mappings depend on the environment
- foreach my $chip (@chip_ids) {
+ foreach my $chip (@chip_ids, @superio_ids_natsemi, @superio_ids_smsc,
+ @superio_ids_smsc_ns, @superio_ids_winbond,
+ @superio_ids_ite) {
if (ref($chip->{driver}) eq 'CODE') {
$chip->{driver} = $chip->{driver}->();
}
@@ -6363,6 +6380,33 @@
return 8;
}
+
+# Chip to detect: FTS Teutates
+# Registers used:
+# 0x00: Device ID
+# 0x01: Revision
+# 0x0C: Device Detection Register 1
+# 0x0D: Device Detection Register 2
+# 0x0E: Device Detection Register 3
+sub fts_detect
+{
+ my ($file) = @_;
+
+ # Device ID must be 0x11
+ # 0x10 == Baseboard Management Controller
+ # 0x01 == Teutates
+ return unless i2c_smbus_read_byte_data($file, 0x00) == 0x11;
+
+ # Revision must be greater or equal 0x2b to use device detection
+ return unless i2c_smbus_read_byte_data($file, 0x01) >= 0x2b;
+
+ # Device Detection Registers must be 0x17, 0x34, 0x54
+ return unless i2c_smbus_read_byte_data($file, 0x0C) == 0x17
+ and i2c_smbus_read_byte_data($file, 0x0D) == 0x34
+ and i2c_smbus_read_byte_data($file, 0x0E) == 0x54;
+
+ return 8;
+}
# Chip to detect: 0 = LM93, 1 = LM94
# Registers used:
diff -Nuar a/prog/detect/sensors-detect.8 b/prog/detect/sensors-detect.8
--- a/prog/detect/sensors-detect.8 2019-10-17 18:43:18.000000000 +0300
+++ b/prog/detect/sensors-detect.8 2021-02-24 18:12:40.000000000 +0300
@@ -38,6 +38,8 @@
questions. Note that this isn't necessarily safe as the internal logic may
lead to potentially dangerous probes being attempted. See the WARNING section
below.
+.IP "--stat"
+Display I2C address statistics.
.SH WARNING
sensors-detect needs to access the hardware for most of the chip detections.
diff -Nuar a/prog/init/fancontrol.service b/prog/init/fancontrol.service
--- a/prog/init/fancontrol.service 2019-10-17 18:43:18.000000000 +0300
+++ b/prog/init/fancontrol.service 2021-02-24 18:12:40.000000000 +0300
@@ -5,7 +5,7 @@
[Service]
Type=simple
-PIDFile=/var/run/fancontrol.pid
+PIDFile=/run/fancontrol.pid
ExecStart=/usr/sbin/fancontrol
[Install]
diff -Nuar a/prog/init/sensord.service b/prog/init/sensord.service
--- a/prog/init/sensord.service 2019-10-17 18:43:18.000000000 +0300
+++ b/prog/init/sensord.service 2021-02-24 18:12:40.000000000 +0300
@@ -5,7 +5,7 @@
[Service]
EnvironmentFile=/etc/sysconfig/sensord
Type=forking
-PIDFile=/var/run/sensord.pid
+PIDFile=/run/sensord.pid
ExecStart=/usr/sbin/sensord -i $INTERVAL -l $LOG_INTERVAL -f daemon
[Install]
diff -Nuar a/prog/pwm/fancontrol b/prog/pwm/fancontrol
--- a/prog/pwm/fancontrol 2019-10-17 18:43:18.000000000 +0300
+++ b/prog/pwm/fancontrol 2021-02-24 18:12:40.000000000 +0300
@@ -287,7 +287,7 @@
pwmo=${AFCPWM[$fcvcount]}
if [ ! -w $pwmo ]
then
- echo "Error: file $pwmo doesn't exist" >&2
+ echo "Error: file $pwmo doesn't exist or isn't writable" >&2
outdated=1
fi
let fcvcount=$fcvcount+1
@@ -299,7 +299,7 @@
tsen=${AFCTEMP[$fcvcount]}
if [ ! -r $tsen ]
then
- echo "Error: file $tsen doesn't exist" >&2
+ echo "Error: file $tsen doesn't exist or isn't readable" >&2
outdated=1
fi
let fcvcount=$fcvcount+1
@@ -313,7 +313,7 @@
do
if [ ! -r $fan ]
then
- echo "Error: file $fan doesn't exist" >&2
+ echo "Error: file $fan doesn't exist or isn't readable" >&2
outdated=1
fi
done
@@ -323,7 +323,8 @@
if [ $outdated -eq 1 ]
then
echo >&2
- echo "At least one referenced file is missing. Either some required kernel" >&2
+ echo "At least one referenced file is missing or doesn't have" >&2
+ echo "correct privileges. Either some required kernel" >&2
echo "modules haven't been loaded, or your configuration file is outdated." >&2
echo "In the latter case, you should run pwmconfig again." >&2
fi
diff -Nuar a/prog/pwm/pwmconfig b/prog/pwm/pwmconfig
--- a/prog/pwm/pwmconfig 2019-10-17 18:43:18.000000000 +0300
+++ b/prog/pwm/pwmconfig 2021-02-24 18:12:40.000000000 +0300
@@ -29,7 +29,7 @@
#
#
-LM_VERSION='3.6.0'
+LM_VERSION='3.6.0+git'
PIDFILE="/var/run/fancontrol.pid"
if [ -f "$PIDFILE" ]
diff -Nuar a/prog/sensors/main.c b/prog/sensors/main.c
--- a/prog/sensors/main.c 2019-10-17 18:43:18.000000000 +0300
+++ b/prog/sensors/main.c 2021-02-24 18:12:40.000000000 +0300
@@ -54,15 +54,16 @@
static void print_long_help(void)
{
printf("Usage: %s [OPTION]... [CHIP]...\n", PROGRAM);
- puts(" -c, --config-file Specify a config file\n"
- " -h, --help Display this help text\n"
- " -s, --set Execute `set' statements (root only)\n"
- " -f, --fahrenheit Show temperatures in degrees fahrenheit\n"
- " -A, --no-adapter Do not show adapter for each chip\n"
- " --bus-list Generate bus statements for sensors.conf\n"
- " -u Raw output\n"
- " -j Json output\n"
- " -v, --version Display the program version\n"
+ puts(" -c, --config-file Specify a config file\n"
+ " -h, --help Display this help text\n"
+ " -s, --set Execute `set' statements (root only)\n"
+ " -f, --fahrenheit Show temperatures in degrees fahrenheit\n"
+ " -A, --no-adapter Do not show adapter for each chip\n"
+ " --bus-list Generate bus statements for sensors.conf\n"
+ " -u Raw output\n"
+ " -j Json output\n"
+ " -v, --version Display the program version\n"
+ " -n, --allow-no-sensors Do not fail if no sensors found\n"
"\n"
"Use `-' after `-c' to read the config file from stdin.\n"
"If no chips are specified, all chip info will be printed.\n"
@@ -270,7 +271,7 @@
int main(int argc, char *argv[])
{
- int c, i, err, do_bus_list;
+ int c, i, err, do_bus_list, allow_no_sensors;
const char *config_file_name = NULL;
struct option long_opts[] = {
@@ -281,6 +282,7 @@
{ "no-adapter", no_argument, NULL, 'A' },
{ "config-file", required_argument, NULL, 'c' },
{ "bus-list", no_argument, NULL, 'B' },
+ { "allow-no-sensors", no_argument, NULL, 'n' },
{ 0, 0, 0, 0 }
};
@@ -291,8 +293,9 @@
do_sets = 0;
do_bus_list = 0;
hide_adapter = 0;
+ allow_no_sensors = 0;
while (1) {
- c = getopt_long(argc, argv, "hsvfAc:uj", long_opts, NULL);
+ c = getopt_long(argc, argv, "hsvfAc:ujn", long_opts, NULL);
if (c == EOF)
break;
switch(c) {
@@ -327,6 +330,9 @@
case 'B':
do_bus_list = 1;
break;
+ case 'n':
+ allow_no_sensors = 1;
+ break;
default:
fprintf(stderr,
"Internal error while parsing options!\n");
@@ -349,7 +355,9 @@
"No sensors found!\n"
"Make sure you loaded all the kernel drivers you need.\n"
"Try sensors-detect to find out which these are.\n");
- err = 1;
+ if (!allow_no_sensors) {
+ err = 1;
+ }
}
} else {
int cnt = 0;
diff -Nuar a/prog/sensors/sensors.1 b/prog/sensors/sensors.1
--- a/prog/sensors/sensors.1 2019-10-17 18:43:18.000000000 +0300
+++ b/prog/sensors/sensors.1 2021-02-24 18:12:40.000000000 +0300
@@ -78,6 +78,8 @@
buses of the same type. As bus numbers are usually not guaranteed to be stable
over reboots, these statements let you refer to each bus by its name rather
than numbers.
+.IP "-n, --allow-no-sensors"
+Do not fail if no sensors found. The error message will be printed in the log.
.SH FILES
.I /etc/sensors3.conf
.br
diff -Nuar a/version.h b/version.h
--- a/version.h 2019-10-17 18:43:18.000000000 +0300
+++ b/version.h 2021-02-24 18:12:40.000000000 +0300
@@ -1 +1 @@
-#define LM_VERSION "3.6.0"
+#define LM_VERSION "3.6.0+git"
Reference in New Issue View Git Blame Copy Permalink